N80 - N80i firmware upgrade guide

[skyhawk]

I am going to flash my N80 to N80IE. Could somoeone (that already have flashed it maybe) tell me the supported languages in the European firmware?

I will be at the safe side before i do anything with it. Its not a cheap mobile to waste, thats for sure...

[skyhawk]

Nevermind. Flashed it already. Works fine

[NMayling]

Think I may have bricked my phone

Working along ok until I got this

Ape->Programming: 88%
Ape->Programming: 89%
Ape->Programming: 90%
Ape->Programming: 91%
Ape->Programming: 92%
Ape->Programming: 93%
Ape->Programming: 94%
Ape->Programming: 95%
Ape->Programming: 96%
Ape->Data send failed. Resending. Make sure that the cable is connected
Ape->Data send failed. Resending. Make sure that the cable is connected
Ape->No response for write data received
Ape->Flashing failed
Flashing failed.
Flashing failed.
ADL USB Flashing Selected


Phone now wont turn on and isnt found by pheonix , anything I can do ? where to next ? ( anyone in central scotland able to do this for me ? )

[hippy1970]

Originally Posted by Ratkat

You do not need to change the product code with NSS prior to flashing with Pheonix, the product code will be changed automatically by Pheonix dependant on the firmware you choose.

The idea of changing the product code using NSS was to allow people to upgrade their 'branded' phones to a 'non branded' firmware using the official Nokia Update Service (NSU). For example if you had a Vodafone N80 and connected it to the NSU you would be told there were no updates, once you had changed the product code using NSS it was then possible to update to the latest firmware using NSU

I assume that installing a 'non branded' firmware would not unlock the phone for use on other networks but simply allow me to use a firmware that is not officially sanctioned by my service provider... correct?

[steffi]

Has anybody successfully upgraded their N80 using phoenix on mac/intel hardware under bootcamp? Does phoenix work under bootcamp?

Originally Posted by hippy1970

I assume that installing a 'non branded' firmware would not unlock the phone for use on other networks but simply allow me to use a firmware that is not officially sanctioned by my service provider... correct?

[fdxd]

Originally Posted by NMayling

Think I may have bricked my phone

Working along ok until I got this

Ape->Programming: 88%
Ape->Programming: 89%
Ape->Programming: 90%
Ape->Programming: 91%
Ape->Programming: 92%
Ape->Programming: 93%
Ape->Programming: 94%
Ape->Programming: 95%
Ape->Programming: 96%
Ape->Data send failed. Resending. Make sure that the cable is connected
Ape->Data send failed. Resending. Make sure that the cable is connected
Ape->No response for write data received
Ape->Flashing failed
Flashing failed.
Flashing failed.
ADL USB Flashing Selected


Phone now wont turn on and isnt found by pheonix , anything I can do ? where to next ? ( anyone in central scotland able to do this for me ? )

i feel for you...

If nothing works you can try and say it just stopped working or something and exchange?

[_Dx_]

well, maybe is not the best solution, but u can buy a J.A.F BOX in order to flash ur Dead N80, i did it, its a great instrument but quite expensive

Dx

[NMayling]

Originally Posted by _Dx_

well, maybe is not the best solution, but u can buy a J.A.F BOX in order to flash ur Dead N80, i did it, its a great instrument but quite expensive

Dx

Its a Solution , I'll take any option just now , but Might hold off and try track down someone local with one that I could borrow ( or just pay )

Considering I've messed up once anyone point me to somewhere that will do it for me ( I know there will be a charge )

[NMayling]

Not sure how but just using pheonix I have a working phone again and its N80i

I kept trying , and it kept failing ( at different % complete ) , and was unable to scan the product , so just did open product

Last attempt gave this
Ape->Programming: 92%
Ape->INFO: Papub keys not programmed to phone
Ape->Programming of file 1 finished
Ape->Trying to verify communication 1 of 3
Ape->Communication verified to Adl Loader
Cmt->Ready for reboot
Ape->Ready for reboot
Ape->Rebooting phone
Ape->Phone rebooted, phone will be started in test mode
Cmt->Trying to verify communication 1 of 30
Cmt->Trying to verify communication 2 of 30
Cmt->Trying to verify communication 3 of 30
..........
Cmt->Trying to verify communication 29 of 30
Cmt->Trying to verify communication 30 of 30
Cmt->Failed to verify communication.
Flashing failed.
Flashing failed.

But for the first time the phone was showing signs of life - battery out and in again and we are good - thanks to all

[chayertz]

Thanks for this post;
I've successfuly transform my N80 into N80i and now enjoy the Voip call with my freebox SIP account in France , that's great !!
I still have trouble to log into WPA/WPA2 network with PEAP but ....

[forzatio]

Hey when I run the pheonix crack I get this error after it shows me a box that a doungle could not be found, nmp_component_mgr.dll NOT FOUND try reinstalling pheonix.

Where would this file be.

[diea]

Hi All..

I just want to know what apac is having the Arabic language? I really don't use it but I need it for incoming messages

please advise me before I flash my phone.

Thanks in advance.

My phone info:
N80 V3.061.0.6 03-05-2006
RM-92 (08)
Product Code: 0537357

[diea]

Hay I Did it Thanks all

The files I used:

0542489 GULF Pearl Black Internet Edition (Arabic-English-Francais-Deutsch-Espanol)
The File is: N80_rofx_4.0632.0.38-prd.V08

but I want to ask about 3 things :
1- The life timer didn't reset!!!
2- During the SW update I got this message (Ape->INFO: Papub keys not programmed to phone) What is that?
3- I didn't use the NSS can I change the product code using phonix? (Without effecting my Language Pack )

Thanks Again

[dez_borders]

Originally Posted by diea

Hay I Did it Thanks all

The files I used:

0542489 GULF Pearl Black Internet Edition (Arabic-English-Francais-Deutsch-Espanol)
The File is: N80_rofx_4.0632.0.38-prd.V08

but I want to ask about 3 things :
1- The life timer didn't reset!!!
2- During the SW update I got this message (Ape->INFO: Papub keys not programmed to phone) What is that?
3- I didn't use the NSS can I change the product code using phonix? (Without effecting my Language Pack )

Thanks Again

3. Because you chose the Gulf PBIE profile manually in Phoenix your product code should now match the one you installed (0542489)

[forzatio]

I tried to install phoenix on three differents pc's now but when I run the crack I get this error time after time:

mp_component_mgr.dll NOT FOUND try reinstalling pheonix.