Thanks Peter. It sounds like some on this forum can make it work but I sure can't and I have been doing Psion/Symbian stuff for almost fourteen years and this is the first time I couldn't figure it out. Might have to send a note to Nokia to see if they have had many questions on this subject. Like I have mentioned it I get to were it says "Do you want to connect" and I then try to connect and that is were it looks like the Machine and Phone does see each other.
You now what, your problem happened with me today. Yesterday was everything OK and today when I connetcted my phone vista started to install driver and did not find. After I've used the technique - what I suggested you before already - ,it found the driver but said unable to install because the system cannot find the file specified. excellent!
After two hours I solved easy way. First you have to connect your phone and wait until vista shows you the driver problem.
After that click on: ask me again later.
Then go to the device manager and you will se the Nokia 9300 usb phone parent with a problem icon.
Click on it and choose update driver.
Choose to browse your self for the driver.
Set the path to c:/program files/Nokia/Nokia Pcconnectivity driver - or something like that -/
Well, I followed your instructions and when I clicked on the driver within the folders specified it said the best driver for the E62 is already installed. I had previously installed it form the Nokia Web Site. I still think its the com port. According to the device manager it should be on com port 8. I don't know how to find out what comport it is actually seeing on the machine and if its pointing to a different one how to change it to 8. It the old Psion days you could very easily find out what com port you were on and if you wanted, you could easily change it. I am not sure how to do it with the newer stuff.