Hi All
Have read all the post but canot get any ports other than COM1/2 and IR in the Mrouter window. PCsuite dated Feb 03, W2K SP3, and 3com Blue tooth. Have tried the installs/reinstalls also disabled modem on COM1 also uninstalled Norton Firewall. No difference. Have I missed somthing? I can send files to and from phone using 3com Connection manager and use the Modem. Interestingly besides the Mrouter issue when I try to open PC suite it tells me to connect phone and Press "OK" but nothing happens the only thing I can do is close the program. All ports showning in Device manager.

Thansk A very frustrated Nokia user!!!!

Did you tried to use new PC Suite, version 1.2.0?

Yes

I Have that is the version I have been trying

Tony

Hi there

Problrm is the mRouter in the new PCSuite (1.2). Try to install old version ( 1.1) then save mRouter subdirectiry ( Intuwave ) someware.
Install again new version of PCSuite (1.2). Overwrite Intuwave subdirectory with the old one. Now mRouter should see all available ports. Hope it helps

Thanks for the suggestion but with that version of Mrouter no ports at all! This is the problem I had with the earlier version. It seems perhaps Mrouter is not picking up the ports on the install routine from the registry ?

Tony

You need to uninstall PC Suite and 3com software

Then follow instructions in this link

http://www.ocworkbench.com/2002/nokia/7650review/p4.htm

I had same problem. This link solved my problem for 98SE and 3com USB. I use version 1.1 of PCsuite though. Have heard that MRouter in 1.2 is buggy.

Doc

Thanks had seen that but I cant get any ports listed in Mrouter except COM1/2 and IR which is not even on the PC. Mrouter shows the ports missing if I disable them so it sees the hard ports but not the serial ones which in my case are on COM4/COM6 in Device manager

Tony

The fact that you can use 3com connection manager software shows that bluetooth and usb is working. Problem must be with Mrouter?

Do you have sdk installed with PCsuite?

I'm sorry I cant help more. I'm not too familiar with Win2k or PC Suite 1.2.

Doc

No I have not been installing the SDK option does this have any effect ? Yes I agree its a Mrouter issue or PcSuite as the other "Funny" is that I cant get passed the inital box that prompts me to connect it only allows me to close the PcSuite.

Tony

SDK is for connecting via cable to other phones, so not needed. Can cause hassles if loaded though

PCSuite won't startup for the first time unless Connected via Mrouter

What firmware is your phone, although this should not be an issue?

You do have Bluecom software loaded before installing PC Suite?

That was were I went wrong.

Hi Doc

Yes have Blutooth loaded during install and phone flashed to ver 4.39. Ithink this is a windows 2K issue or somthing I have on my PC that is causing the problem. Can you tell me if you disable the ports in Mrouter will PCsuite still open as mine wont. I have been assuming this is because there are no ports but if it still opens it suggests other issues. I could partition a part of the drive and install w98se but it seems a long way about.

Tony

PCSuite won't open for the first time if there is no Serial port.

I'm sure it's not W2000. I've seen many people using it with 2000. Even XP seems to be working now.

It could be something on your PC. I also have Norton Firewall though. No Problems with that.

When you open 3com Bluetooth manager and go to com ports does it list DUN, Serial, Lan and Fax clients with applicable Com ports?

Doc

yes it does and I can use the Modem (the 3com one) I have all showing in device manager (DUN,FAX,LAN and Serial Clients and a Serial Host).
Just that nothing comes up in Mrouter.

Do you know what the registry entries look like for Mrouter ? I could compare them

Tony

Sorry no idea what registry entries look like.

Have you tried what kreso suggested. I've heard it elsewhere that mrouter in v1.2 doesn't work but 1.1 does if you copy it over 1.2 files

Doc

Yes tried that but then I got NO ports! I am suspicious it may be a W2K thing with SP3 perhaps someone else has had a prtoblem with this set up

Tony 8)

Hi
I have using WinXP now for some time. Before I used W2K with SP3. I installed PCSuite v1.1 and 3Com BT. After some problems I get it working most of the time. Because of disk crash I installed WinXp. In the same time Nokia release PCSuite 1.2 so I deside to giv it the try. Result NO GO. PCsuite installed first then 3Com BT SW- NO GO. I also try different aproach which is 3Com BT SW first PCSuite afterwards- NO GO. I all instances only COM1/2/IR available. After last attempt with no luck I cleand my system completly from PCSuite and 3Com BT SW( subdirectories and registry) and start from schratch. Here is how I done it.

1. Installed 3Com BT SW and drivers
2. Reboot
3. Installed PCSuite v 1.1
4. Reboot
5. Copy Intuwave subdirectory
6. uninstalled PCSuite v1.1
7. Reboot
8. Install PCSuite v1.2
9. Rewrite Intuwave subdirectory with old(1.1)
10. Reboot
11. Start 3Com BT Manager and check for the COM ports
12. Start mRouter and you should see all available COM ports
13. Check COM ports for the BT connection (3 and 4 in my case )
14. mRouter may complain that port is in use but soon it will connect

Hope this helps
regards

g3uiss, have you had any luck yet?

i have almost the same problem, running WIN2K and i assume PC Suite 1.2.

Kreso, will try your method - i know my bluetooth is working as i can connect and see Nokia7650 on my PC and send info requests from explorer, its just MRouter which is playing up!

Matw
No I have tried the use of the older version of Mrouter but all I have is V1.0 not 1.1 but using the Mrouter folder "Intuwave" etc I get no ports at all!

If you have exactly the same problems there must be somthing in common. I can use the Bluetooth software to transfer files and access through the modem.

Tony

yeah this sounds exactly like my problem

i will try my best to find a fix, and if i do, will PM you with what i've done as i would guess it is the same thing!

Thanks

I am going to try a last go at starting from scratch and will post result!

Tony

No Luck did everything suggested. Need someone else to let me see what regisrty entries look like on W2K so can compare I think Mrouter does not see ports on install

Tony

hi there.
I have the same problem with the new version of PCSuite (1.2).
What I did was to overwrite the new directory of mrouter on the installer of PCSuite 1.2 with the old one from PCSuite 1.1
This solution is at the installer level and worked for me.

Charral

I tried that a least with V1.0 as I did not have V1.1. When I did that I got no ports at all. Do you know if the "Intuwave" files were updated between V1.0 and 1.1 if so perhaps could you "Zip" them and email me?

Tony

*****Solved*****

To all that responded thanks. The solution was similar to suggested but as follows. Install 3 Com and ensure works with phone ie connects. Install PCsuite 1.0 or 1.1 go to the Intuwave directory and copy the MrouterSerial.dll to a tempoary locatation. Uninstall PcSuite. Install PcSuite V1.2. Now the tricky bit. You need to stop the Mrouter/Connection Manager/Broadcast/econnect programs that the suite runs at startup by using cntrl/alt/del and end these progs or in W2k/XP stop in the services tab. Now overwrite the Mrouterserial.dll with the old version you stored and reboot and it all works!

Happy to claify if needed. The main issue is that the mrouterseril.dll will not copy if any of the PCSuite internal programs are running. hence the instructions. Good Luck...Tony

There is a 2k/XP app which replaces files currently in use by the O/S, if anyone needs, please PM me and ill mail it over

Eck

does anyone have Nokia PC Suite v1.1 - im pretty sure that i can get it working if i were to be able to get this software, but the Nokia site only seems to give you the latest version, 1.2, and that is whats on my CD.

Please PM me if you can help :D , ive looked hard for it elsewhere but thought it should be ok to post this request here as i have PC Suite and it is a free download that anyone can have.

Cheers

Matt

Matt

As you only need the Mrouterserial.dll I can email this to you ziped up its only 273K before compression. You can then install V1.2 and copy this over after the install taking note to stop the programs. Advise an email address

Tony

*****Solved*****

To all that responded thanks. The solution was similar to suggested but as follows. Install 3 Com and ensure works with phone ie connects. Install PCsuite 1.0 or 1.1 go to the Intuwave directory and copy the MrouterSerial.dll to a tempoary locatation. Uninstall PcSuite. Install PcSuite V1.2. Now the tricky bit. You need to stop the Mrouter/Connection Manager/Broadcast/econnect programs that the suite runs at startup by using cntrl/alt/del and end these progs or in W2k/XP stop in the services tab. Now overwrite the Mrouterserial.dll with the old version you stored and reboot and it all works!

Happy to claify if needed. The main issue is that the mrouterseril.dll will not copy if any of the PCSuite internal programs are running. hence the instructions. Good Luck...Tony

Hi Tony

Glad you sorted it out.

I've taken PC Suite out of my Startup directory. I only load it when I need to make a backup. The rest of the time I use the 3com software without mrouter. That way you can send from phone to PC via BT

Hi Doc

Yes I have done the same. In fact when you run PcSuite it loads all the necessary programs so they dont really need to be in the startup directory. One wonders how less tecnical aware users would ever get this working!

Cheers

Tony

Guys,

could you please clarify something for me. The RS60 allows connection through IR and BT but it also mentions TCP/IP, what does that mean?

Am I wrong to believe that 7650 could be remotely controlled through Internet? Basically when we get a GPRS connection - for surfing f.i. - and attach to the network, there is an IP address assigned to the handset, although it's not visible as managed by network (GGSN), this IP adress could then serve as a connection and control point for the handset. Is RS60 designed for that?

Anyone knows?

This is a private IP address on the Mobile network, unfortunately the public Internet.

Remote control over the net of the phone is therefore not possible in this way.

I suppose it could be possible if you could connect it to your own mobile network and assign addresses from the public address range.

Bob :)

I wonder if even i get that subnet IP address set by the ggsn, i'd be able to control the handset, the GPRS network firewall might be blocking the application.

Anyway, this should be investigated further, it's opening the door to interesting hacking I guess...;)

You could probably develop an application that controls one phone from another phone on the same mobile network as the handsets would be on the same private network!!!

As for Internet access the carriers are acting as an ISP for mobile cistomers to access the net through WAP.

If you connect to your ISP via your phone as a modem you are using the mobile network as a tunell to the internet.

So you could try to remotely control one phone from another, but I doubt the internet, good luck though.

Bob

Hi,

*****Solved*****

To all that responded thanks. The solution was similar to suggested but as follows. Install 3 Com and ensure works with phone ie connects. Install PCsuite 1.0 or 1.1 go to the Intuwave directory and copy the MrouterSerial.dll to a tempoary locatation. Uninstall PcSuite. Install PcSuite V1.2. Now the tricky bit. You need to stop the Mrouter/Connection Manager/Broadcast/econnect programs that the suite runs at startup by using cntrl/alt/del and end these progs or in W2k/XP stop in the services tab. Now overwrite the Mrouterserial.dll with the old version you stored and reboot and it all works!



I would just like to go back to the topic of this post and thank Tony and the others for solving this issue. I have replaced the mrouterserial.dll with an older one and now everything works fine. Com3 und Com4 are visible and the sync with Outlook worked!

There remains only one question: how do you switch between online and offline mode? The only way seems to be to kill all Bluetooth and MRouter processes, start BT again, connect the phone, start MRouter again and check the Com-Ports? There should be a simpler solution, but I did not find any yet...

Thanks a lot again,
--
Dennis

BTW: Tony, nice to see you again after your answer in Forum Nokia :-)

Dennis

Glad it all worked. I have found no way other than shutting down Mrouter etc but I have found if you start the 3 Com connection manager first then PCsuite it loads all the programs and does not need the com ports selecting again. Seems the order of events is important!

Tony

Doc

Yes tried that but then I got NO ports! I am suspicious it may be a W2K thing with SP3 perhaps someone else has had a prtoblem with this set up

Tony 8)
I have same problem, win xp, suite 1.2.0, mrouter only shows IR Port, no comport and no bluetooth!

please
please
please

send me the Mrouterserial.dll...

to: webwilli@ocworkbase.com

Matt

As you only need the Mrouterserial.dll I can email this to you ziped up its only 273K before compression. You can then install V1.2 and copy this over after the install taking note to stop the programs. Advise an email address

Tony

Hello Tony,

can you E-Mail the Mrouterserial.dll to me too?
kallmeyer@gmx.de,
because I get the V1.2 with my phone....

I have the same problem with Windows 2000 and mRouter (no ports available).

Please, can anybody send me the mrouterserial.dll v1.1?

Thank you very much from Barcelona,

Javier Muñoz
javier@moviland.com

Can someone email the file to me too. I have WinXP sp1 with Belkin f8t003 and have the same problem. Only IR port in MRouter. bikeguy0@hotmail.com
Thanks.

Can someone email the file to me too. I have WinXP sp1 with Belkin f8t003 and have the same problem. Only IR port in MRouter. bikeguy0@hotmail.com
Thanks.

Would some1 b so kind as 2 mail me mrouterserial.dll please ?

Many thanx,

Rob.

rob@puricelli.freeserve.co.uk

Hi guys.


Would really appreciate that file - re-installed my machine and ran into the same problem!

Already deleted old PcSuite :(

Cheers

E-mail @ willbrady@hotmail.com

Will.

Is there any good reason to upgrade to 1.2?

I've got 1.0 working fine (with 3com) and now feel slightly nervous about upgrading.

What extra bits would I get?

Is there any good reason to upgrade to 1.2?

I've got 1.0 working fine (with 3com) and now feel slightly nervous about upgrading.

What extra bits would I get?

Post your copy of Mrouterserial.dll up here please :)

Please, please, please.

Will :)




.

I thought you were after 1.1?

Is posting a dll for a commercial product allowed under forum rules?

Send us a PM and I'll mail it to you (when I get home this evening)

I'll post the dll after I've checked with admin...

Well don't do any sending too until you check with admin! ;)

Sending would be on my own head - with no repucusions for the site :D

plus admin will answer AGES before I manage to get away from work :cry:

Ok from what I've gleamed reading through the thread, the .dll is part of the PC Suite, which Nokia give freely on their site so you can communicate with your device. Therefore the .dll should be able to be freely distributed in the same manner to the way the old PC Suite was. I see no problem with people sharing this file, also has anyone with the problem informed Nokia and explained the solution to them?

Thanks for that :)

I've bunged a mail to Nokia forum to highlight the issue to them


Will post the dll in roughly 4 hours (when I get home)...

Found the file - and it works a treat!!! :)

I see no reason for NOT sharing it - as you say, it's free software and at some point in time we ALL had it on our original CD's when we bought our phones.

Enjoy


Will

Nice....(saves me remembering)

Hi All

Seems I started somthing when I posted the advice to use the older mrouterserial.dll. Many have requested this from me by PM which I have done. I assumed like the above as the software was in the public domain downloadable from a open site there could be no issues.

I am pleased that this has helped so many and if the file is up here I will get a rest from PM's requesting it!!!

Good luck to all

Tony

Wonder if Nokia appreciate the feedback.....

hi all and thankx for all helps that u contribuate in this forum.

When i see finally that mrouterserial.dll old version can solve the problem to connect nokia 7650 to pc i dont beleive, it's really do ?

please g3uiss, and others friends of the best forum, can u send me the file or when i can get it, sincerly iam very tired after one to search this file in many website and forum !!!!!!!

I will be very happy if i receive this file.

thanks in advance and goodluck for all people here !


My email is : EULERF@YAHOO.FR

Hi

I have sent it to you by e-mail

Regards

Tony

Really thankx .... i will try it after and notify my results in this forum after, i hope that it will work finally, i wish !

thankx Tony

Hi guys,

1st off, thanx 2 Tony 4 sending me the file, much appreciated.

I contacted Nokia and informed them of my problems and they r aware of the issue and know that it is Mrouter that causes the problems. Nokia r currently working on PC Suite 1.3 and will upload it 2 their site soon. Until then they agree that the Mrouterserial.dll/Intuwave copy over is the only solution.

Unfortunately, it doesn't seem 2 work 4 me. Maybe it's coz i'm running XP Pro, i'm not sure, but i've given up 4 now :( 1 thing that was apparent was that when i copied it over, there was no existing Mrouterserial.dll file 2 overwrite. Is this normal, or have i got a screwed up install ?

Cheers guys,

Rob.

Hi

I think you may be looking in the wrong place. The MrouterSerial.dll is in the Intuwave directory NOT the Nokia one. You need to navigate to the bottom of the tree and then overwright the file. NB you cannot do this inless you stop all the Mrouter Programs by using Cntrl/Alt/Delete and stoping Broadcast.exe, Mrouterruntime.exe . Errorlog, connectionmanager, etaskmanager.exe. Then you can overwrite the file reboot and ...should all work!

Tony

hello!

can someone please send me mrouterserial.dll version 1.1 file! pretty please! :) i can't find it anywhere on the net... my email is: saso_k@hotmail.com

greetings,
saso

:) :)
i didn't see that it's already attacted to a message in this threat... so i don't need it anymore...

i hope it will work.

greetings,
saso

After reading the forum entries it would seem that I too require Mrouterserial.dll

Could someone be kind enough to mail me version 1.1 and put me out of my misery!

ajm@ajmsystems.co.uk

Gratefully yours

SandyM

would this work for people who have the same problem but with an irda connection? could you please send me the file so i can try it out? thanks

ups, forgot to login, that was me who posted that, can you please send it to my email, thank you

my email: andreas@private.com

Hi Every one

I still am receiving a daily request for this file so although it has been posted earlier it is attached to this message. Please use this as I canot guarantee to be able to send it as I work away from home quite a lot

Tony

thanks tony, now i see the attachment. i will try all these steps even if i have an irda and not bluetooth and let you know if it worked. thanks for the support

does anyone know where i can download version 1.1?

Andrea's

The only solution is the one I have posted that seems to be know of. If I was you I would try uninstalling the PC suite and BT software and starting from scratch. Clean out the registry entries also as many attempts could have caused duplicate keys and other issues.

Tony

thanks tony, i just called nokia and they said that irda connections arent compatible. so they said only solution to get this fixed is buying a bluetooth... 3 weeks sitting and now i get an answer like that from nokia! i tried it on a coworkers computer and it worked perfectly! but on mine just cant get it, always get that f****** message that the port is occupied by another application. i will try to clean all registers, uninstall everything and then see what happens...

nope, no luck. clean everything, installed pc suite again, overwrote the .dll like you said tony, but no: i always get the same damn message: http://www.laesk.com/basura/7650.jpg

please help me someone. there are a lot of experts in here enough to help me. please. getting frustrated now...

Andreas

Do you have the serial ports on your blooth software you should have a "Host" and "Client" . Also you have shut down the Mrouter progra,ms before overwriting. Seems the problem is exactly the same as I had before the overwrite. What OS are you using I have only proved this on W2K SP3 and XP SP1

Tony

Sorry gents, obviously a bit thick as I can't see the attachments in the above string containing mrouterserial.dll Hopefully one of you will take pity and e-mail it to me. XP with a sitecom usb bluetooth adapter and getting seriouly fed up of trying to make it see the bluetooth com ports. I'm kinda hoping this file is the magic bullet. Thanks for putting a technophobe out of his misery.
jezamanda@aol.com

Andreas

Do you have the serial ports on your blooth software you should have a "Host" and "Client" . Also you have shut down the Mrouter progra,ms before overwriting. Seems the problem is exactly the same as I had before the overwrite. What OS are you using I have only proved this on W2K SP3 and XP SP1

Tony

Tony, I dont have bluetooth software. I have a "Bridge" cable: Infrared reciever to USB. Its a usb cable which i plug into my pc via usb and at the other end an infrared reciever. I know from Nokia they say officially it shouldnt work with this kind of cable, but I saw a friend from work doing it and it worked perfectly, I have to ask him though which OS he has.

I work also on Windows 2000 with SP3 version 5.0.

Before overwriting with the dll i closed down following: mRouterRuntime and ConnMngnmtbox

@jez H, to see attaches you'll need to register - it's quick & free!

Paul

Hi

I am sorry but all the posts refer to connecting by blue tooth and I have no informtion on IR connections although I know USB devices are notariously problematic

Tony

Thanks for the hint Paul. Downloaded the file but hasn't worked for me I'm afraid, I the IR port option is still the only one that appears (the only b#$*dy port I don't have) Guess I'll just have to keep swearing at Nokia until the new software appears. Anyone any idea when? :evil:

Could someone email me the mrouter 1.1 dll or tell me where I can donwload PC Suite 1.1.
I have tried Googling for it but could not find anything.

The email address is fulcrumusa at netscape dot net

Thank you

Hi

You can download from my post above but to see it you have to be a member. Its easy and quick.

Tony

hi it seems i finally found something that can help this problem. I fortunate have the pc suite 1.1 tried installing that but no luck. still no com ports.
So can anyone please send the dll. i'm really desperate, have tried for over 4 days to get this working.

i saw it in your post will try it, thx

Just can't seem to get to list the other ports, overwritten the dll but no luck only the infrared port.

Anyone please help.

Hi

You have other problems with V1.1 the only solution I found that worked was as previously posted. Start from scratch. Install the latest PcSuite (Feb 03) Restart PC. Stop all PcSuite programs CNTR-ALT-DEL such as Mrouer,ConnectionManager, Etaskscheduler, capman,errorlog and copy the Mrouterserial.dll posted on ths forum. Restart and you should have all the com ports . You might find the PC objects to comm3 but it will still connect.

Tony

the stupid part is, i had i t working yesterday. I dunno how but somehow it just discovered all com ports (thats with the newer version I mean), and after a reboot of comp all was gone.

But i'll follow up your instructions.
Hopefully it'll work otherwise i'm at the stage of smashing the bloody thing by throwing it at the wall :)

Hi

Well if it worked once...Yes I know it is the most frustrating peice of software known to man. But the process I have described has worked for most, and for me on 2 differnt installs.

You will of course have checked in th BT software the appropriate serial ports you need host and client

Tony

nope scratch install no luck, i'll have to think of something else.
luckily i've got infrared and bluetooth. so i can still connect through infrared.

Will let you know if something else worked, thx anyway!!

Hi

Just run through what you have done and also your BT setup and I will see if I can spot anything that might help

Tony

Clean windows XP Image (SP1)
Installed Bluetooth software (Belkin)
Reboot PC, attached Bluetooth device
Reboot PC, Install Nokia PC Suite (Latest version)
Reboor PC, Configured serial connection with Bluetooth and Nokia.
Killed all Processes for Nokia and M-router, Overwritten DLL in Intuwave directory.
Reboot PC
Check for serial ports in m-router properties,
Just the infrared.
E-mailed intuwave, andcomplained about bad support.
Still haven't received a reply :)
Well i'll keep keep trying (I had got it once so, so it is possible)

I know the Belkin software I have had it working with that. Can you connect to the phone and have you paired the connections. Can you create a DUN and dial out via the phone using the blooth connection.

Tony

I found it, I found it!!!
After 3 ghost images i found the anwser to this annoying stupid problem.
It all started when is used an XP image dated 3 months ago. when booting i ignored all the new found hardware and did not install any drivers for them.
After installing Bluetooth an Nokia software, i saw all Com ports!!

Then i re-imaged the whole thing again with a more recent ghost image of XP. NO new hardware found, and started to install bluetooth and Nokia Software, guess what. Only Infrared port. So what was different this time?

Two pieces of hardware were already installed, my analog modem (Ambient) and the Irda USB device.
I firstly disabled the IRda, reboot nothing (reinstalled IRda). Then disabled the modem, EUREKA all comports visible.

I enabled the modem again and rebooted, guess what only Infrared port.
Well you can guess what happened next. (repeated about 4 times, with exact the same results)

I think the M-router software can't list all comports if an Analog modem (dunno if this only accounts for Ambient CLM DATA FAX VOICE modem)is installed and occupies the COM3 port.

Also i'm using the latest Nokia PC suite, and I did not overwrite Any DLL-file in the Intuwave directory.

My advice, disable any Analog modem that is installed, and all comports should be visable!!

Tony, thx for your support and determination!!

hhelgo


Well done. Enjoy the PC suite. The only problem we will have to go through all again when we change phones!!

Tony

hhelgo

Fantastic work mate, you've just saved my 3650 from the bin! I'd been trying for a month! For anyone with mrouter com port problems, try the fix above, it worked for me when nothing else did.

Top work fella. :D

Hi,

I've just got the phone and have been trying to connect & following the strand here. I've got precisely the same problem - PC Suite 1.2 comes up with only COM1, 2 & IR. Bluetooth is working because the phone asks if I want to connect, but then it all goes pearshaped. I've also tried everything suggested in this post. I'm on W2000 too.

If anybody finds a solution PLEEEEASE let me know. No BT defeats the point of having the phone in the first place.

AJ

Right. Sorry about the above post I've read all 93 entries now. I'm not techie enough to start messing about with mrouter stuff on my work computer.

Does anyone know where I can get my grubby mits on PC Suite v1.1 to download?

thanks,
AJ

AJ

Version 1.1 is the same as distributed with the original software disk that came with a boxed phone. I think unless you have that you will have difficulties. If you look back there is a post of mine with step by step instructions and the file to download. You need to be registered to download the file, its simple and free. I think we would run into copyright difficulties if we put up the whole original CD for download!

Tony

Thanks ever so much Tony. I've brought the CD into work with me (originally just downloaded it from nokia.com).

I'll give it a whirl today. fingers crossed!

AJ

Hi again,

I've followed the instructions word for word. Installed v1.1 (from original CD), copied Intuwave, uninnstalled, installed 1.2, copied back intuwave, reboot etc.

Now all the COM ports are coming up, as promised, COM 1-9. excellent.

Thing is, my USB things are COM 0. So I'm essentially back where I started. Anyone got any ideas? It's so tantalisingly close!!

Thanks again for all your help.

AJ

Hi

Go to you BT software and under the serial port config try to set the Host to Com3 and the client to Com4 select them in Mroter setup by clicking the Icon in the task tray and it should work, note it might compalin that COM3 is allocated to IR ignore the message and it should still work. It takes a moment or two to connect.

Tony

Tony& all contributors here you are an absolute star. thank you so so very much indeed.

it works!

AJ

I downloaded the latest PC Suite from Nokia web site. The mrouter has detected my phone, I can choose Infrared port connection, I can transfer files. BUT Nokia PC Suite would NOT start. :cry: Do you think v1.1 of mrouterserial.dll will help ?

I've registered for this forum, but cannot find the mrouterserial.dll file inthis thread. How can I find it?

Boon

The file you require is in my post dated 03 July. In an earlier post there are detailed instructions for the setup

Good Luck

Tony

Hi

Exactly same problem! This time WinXP, the v1.2.0 PC Suite from Nokia web site. I am able to use 3com software without any problem to move images (files, etc.) with its tools but PC Suite see only com1,2+IR.

3com install everything on com4, 5, 6, etc - ports that are not "visible" for Mrouter.

Do you have more ideas?

follow all the advice in this post - it's brilliant. I'm on Win2000, same problems, but it just miraculously worked eventually when I actually switched the computer off and turned it on overnight. brilliant.

I'm not the expert though.

Good luck!

AJ

Hi All
Only one file is needed from old PC-SDuite. That is mRouterseriell.dll.
Copy that file to new installation and PC-Suite 1.2.0 and all the com ports will be visible.
regards
kreso

follow all the advice in this post - it's brilliant. I'm on Win2000, same problems, but it just miraculously worked eventually when I actually switched the computer off and turned it on overnight. brilliant.

I'm not the expert though.

Good luck!

AJ

Hi AJ,

Thank You! Now is working to me too, with all ports visible!
Cristian :)