N80 - N80i firmware upgrade guide [Archive]

Cash

03-12-2006, 10:03 PM

IMPORTANT CHANGES

It is now possible to upgrade the N80 to N80ie with the Nokia software updater (NSU), you may have to change your product code with NSS http://rapidshare.com/files/5911866/nss10383.rar , EURO 3 code has been tried and works :)

If the above works then you don't need to do anything else, the guide will remain for others that are unable to upgrade with the above method.

Ok some people aksed for it so here it is including all downloads that work..

This is for European but you can use the APAC firmware instead if thats what you require

Firmware Euro

EMEA 15.00 Package:
http://www.megaupload.com/es/?d=ZTNNMFKD

EMEA 15.01 Update:
http://www.megaupload.com/es/?d=NHV66BID

Firmware APAC

http://rapidshare.com/files/5106380/N80_RM-92_IE_APAC_PR_v15.00_SW4.0632.0.38.rar

Pheonix bit torrent link

http://www.demonoid.com/files/details/800331/?show_files=1&page=1&ref=1169983503#file_list

Diego, cracks, reaper

http://rapidshare.com/files/5943056/Diego_dongle_crack_pheonix_crack_reaper.rar

NSS

http://rapidshare.com/files/5911866/nss10383.rar

Instructions

First change product code with NSS to allow flashing to N80i

1, install NSS and run
2, plug in phone and select "pc suite" on phone
3, in NSS click "scan for new devices"
4, Click phone info
5, click enable product code and enter 0543922 (this is for Euro with English but other codes are below, if you want apac then remeber to use the apac firmware)
6, Click "write"
7, when complete unplug phone and exit NSS

UNINSTALL ALL RELATED NOKIA PROGRAMS AND DRIVERS, THIS INCLUDES NSS, PC SUITE, CABLE DRIVERS AND ANY PREVIOUS INTALLATIONS OF DIEGO, PHEONIX ETC.

Now run the 2 firmware files, 15.00 first and then 15.01 ( this is for euro)

Now to install pheonix

1, Run reaper, all instructions are included within reaoer, you dont have to download anything because all files are included here.

2, Follow instructions "how to install pheonix" (skip the download files part)

3, install Diego

4, open pheonix dongle crack (double click on it but dont install yet)

5, install pheonix untill it prompte for dongle not found.

6, click "retry" and run crack immediately and press "yes to all" in new window that opens, if done correctly then pheonix will continue to install normally, if you didnt do this correctly then close current pheonix installation and re-start pheonix installation from step 4 above - YOU HAVE TO DO THIS STEP VERY VERY QUICKLY OR PHEONIX WILL NOT INSTALL AND YOU WILL HAVE TO TRY AGAIN.

7, It may stop installing pheonix with "DESkey not found" click on yes twice then it will continue to register dll files (in some cases you will not get this message untill after you restart your computer if prompted after installation)

8, restart your computer.

9, copy pheonix crack and framework.dll into pheonix folder (this is the folder that you installed pheonic into . probably C:\Program Files\Nokia\Phoenix (but this may be different on your PC)

10, Run pheonix and enter your details...now pheonix will work.

To install firmware into your phone

1, back up your phone to the memory card, and then remove the memory card and sim

2, turn on phone and accept to use without sim

3, connect phone to PC with USB cable and select PC Suite

4, wait while the drivers are installed

5, you should have the latest firmware pages..if not then download via reaper

USB Flashing for N80

MAKE SURE YOU HAVE FULLY CHARGED BATTER (VERY IMPORTANT)

1, run pheonix and click file ->manage connections
2, click on the new button
3, tick USB and click next
4, it will find the handset connected via USB and click on next
5 it will display USB and click finish
6, Now place USB on top and click on apply -> close
7, click on file -> scan product
8, you will notice the handset has been detected, (look at the very bottom line of the window to see the phone info)
9 click on flashing -> sw update
10, select your product code (the code previously eneterd in NSS above) and click start
11, now pheonix will flash your phone...leave your phone alone EVEN IF THE SCREEN GOES BLANK AND YOU THINK ITS STOPPED UPDATING and do not dissconnect the usb cable as this will damage your phone.
12, after flash is complete a message will say "USB flashing successfull", your phone will boot up and will take 1 - 3 minutes to start so be patient

YOU NOW HAVE n80I PHONE

Notice you will have an internet folder, after you restore from your memory card the internet folder will dissapear and contents will be in "my own" folder.

I take no responsibility for any damage caused to your phone, this is entirely at your own risk, and this will also probably void your warrantee.

Product codes

Here are the product codes for both APAC and EMEA N80 Internet Edition

N80 Internet Edition Rm-92 APAC
================================

0539367 HONG KONG Pearl Black Internet Edition
0539857 TAIWAN Pearl Black Internet Edition
0539858 APAC 1 Patina Bronze Internet Edition
0539859 APAC 1 Pearl Black Internet Edition
0539910 THAILAND Pearl Black Internet Edition
0540588 AUSTRALIA Patina Bronze Internet Edition
0540589 INDIA Patina Bronze Internet Edition
0540654 NEW ZEALAND Patina Bronze Internet Edition
0540779 PHILIPPINES Patina Bronze Internet Edition
0540782 INDONESIA Patina Bronze Internet Edition
0540783 THAILAND Patina Bronze Internet Edition
0540839 APAC 1 Smooth Stainless Internet Edition
0540841 THAILAND Smooth Stainless Internet Edition
0540843 AUSTRALIA Pearl Black Internet Edition
0540845 NEW ZEALAND Pearl Black Internet Edition
0540859 INDONESIA Pearl Black Internet Edition
0540860 PHILIPPINES Pearl Black Internet Edition
0540861 INDIA Pearl Black Internet Edition
0540862 PHILIPPINES Smooth Stainless Internet Edition
0540863 INDIA Smooth Stainless Internet Edition
0540864 AUSTRALIA Smooth Stainless Internet Edition
0540865 NEW ZEALAND Smooth Stainless Internet Edition
0540866 INDONESIA Smooth Stainless Internet Edition
0541538 TAIWAN Smooth Stainless Internet Edition
0541542 HONG KONG Smooth Stainless Internet Edition

N80 Internet Edition Rm-92 EMEA
===========================

0539362 ALPS Patina Bronze Internet Edition
0540868 ALPS Pearl Black Internet Edition
0542289 BALKANS Patina Bronze Internet Edition
0543252 BALKANS Pearl Black Internet Edition
0541428 BALTIAN Patina Bronze Internet Edition
0541440 BALTIAN Pearl Black Internet Edition
0542808 CIS, BULGARIA Patina Bronze Internet Edition
0542811 CIS, BULGARIA Pearl Black Internet Edition
0538301 EURO 1 Patina Bronze Internet Edition
0539363 EURO 1 Pearl Black Internet Edition
0539548 EURO 2 Patina Bronze Internet Edition
0539712 EURO 2 Pearl Black Internet Edition
0539473 EURO 3 Patina Bronze Internet Edition
0544109 EURO 3 Pearl Black Internet Edition
0539646 FRANCE Patina Bronze Internet Edition
0540867 FRANCE Pearl Black Internet Edition
0542814 GREECE, CYPRUS Patina Bronze Internet Edition
0542816 GREECE, CYPRUS Pearl Black Internet Edition
0539672 GULF Patina Bronze Internet Edition
0542489 GULF Pearl Black Internet Edition
0539673 ISRAEL Patina Bronze Internet Edition
0514757 ISRAEL Pearl Black Internet Edition
0542487 LEBANON Patina Bronze Internet Edition
0542488 LEBANON Pearl Black Internet Edition
0514753 MOLDAVIA, BELARUS Patina Bronze Internet Edition
0514755 MOLDAVIA, BELARUS Pearl Black Internet Edition
0514751 ROMANIA Patina Bronze Internet Edition
0514752 ROMANIA Pearl Black Internet Edition
0539652 RUSSIA Patina Bronze Internet Edition
0542699 RUSSIA Pearl Black Internet Edition
0539648 SCANDINAVIA Patina Bronze Internet Edition
0541439 SCANDINAVIA Pearl Black Internet Edition
0542490 SOUTH AFRICA Patina Bronze Internet Edition
0542525 SOUTH AFRICA Pearl Black Internet Edition
0539897 TURKEY Patina Bronze Internet Edition
0541690 TURKEY Pearl Black Internet Edition
0542703 UKRAINE Patina Bronze Internet Edition
0542810 UKRAINE Pearl Black Internet Edition

cbcharlie

03-12-2006, 11:03 PM

is changing product code with nss necessary? i didnt do that, i just flashed.

Cash

03-12-2006, 11:12 PM

is changing product code with nss necessary? i didnt do that, i just flashed.

Maybe not, but its a simple process and only takes a couple minutes,

I didnt try without changing the product code, I thought its best to be safe than sorry as I read that you have to change the product code somewhere, and some people like the product code to be correct for their phone and the N80i.

I am not sure and may be corrected here, but it may have something to do with the languages that are installed in your phone..

waspin

04-12-2006, 02:12 AM

I get an error using phoenix... whein I go Product->Phone Information an error windows pops up:

I uninstalled every single nokia product as it says on reaper.

But when I go SW update it seems to be working as I can select the code and etc... Is that normal ?? I mean the error message regarding phone information and etc...??
Error while reading Info data from the provider.
Please check that the product is connected properly
and the connection has been established.

HRESULT 0x80004003 (-2147467261)
This means:
Ponteiro inválido

Cash

04-12-2006, 09:12 AM

elaverick

04-12-2006, 09:59 AM

This sounds to me as though something is interfering with the connection between Phoenix and and your phone. First off check the most obvious things like ensuring that you have a good solid cable connection and that it's plugged into a verifiably working USB port.
The other thing that might be causing issues is if your PC Suite/Nokia Cable Driver didn't uninstall fully. If this is the case try the method I used and install Phoenix and Diego on a Virtual Machine. I used VMWare server (http://www.vmware.com/products/server/) which is nice and easy to get to grips with. Only thing to remeber here is that you give the Virtual machine access to the hosts USB ports in the Virtual machine settings. This method has the advantage that you can guarrentee you are running on a clean installation of Windows without having to format your existing PC.

Ratkat

04-12-2006, 10:11 AM

Maybe not, but its a simple process and only takes a couple minutes,

I didnt try without changing the product code, I thought its best to be safe than sorry as I read that you have to change the product code somewhere, and some people like the product code to be correct for their phone and the N80i.

I am not sure and may be corrected here, but it may have something to do with the languages that are installed in your phone..

You do not need to change the product code with NSS prior to flashing with Pheonix, the product code will be changed automatically by Pheonix dependant on the firmware you choose.

The idea of changing the product code using NSS was to allow people to upgrade their 'branded' phones to a 'non branded' firmware using the official Nokia Update Service (NSU). For example if you had a Vodafone N80 and connected it to the NSU you would be told there were no updates, once you had changed the product code using NSS it was then possible to update to the latest firmware using NSU

vin_eme

04-12-2006, 10:12 AM

Cash,

thanks for the neat steps....one more happy customer with N80i firmware...

~Cheers

Cash

04-12-2006, 10:14 AM

You do not need to change the product code with NSS prior to flashing with Pheonix, the product code will be changed automatically by Pheonix dependant on the firmware you choose.

The idea of changing the product code using NSS was to allow people to upgrade their 'branded' phones to a 'non branded' firmware using the official Nokia Update Service (NSU). For example if you had a Vodafone N80 and connected it to the NSU you would be told there were no updates, once you had changed the product code using NSS it was then possible to update to the latest firmware using NSU

Ok...so I can delete the part about NSS ?...this is the way that I did it and thats why I wrote the guide like that because I know it works .....

I didnt try flashing without prior changing the code, so I didnt write the guide like that..

In any case it doesnt harm the product, and the firmware will then be chosen automatically for you ... maybe a little easier for people who are not too technically minded perhaps..

Cash

04-12-2006, 10:17 AM

Cash,

thanks for the neat steps....one more happy customer with N80i firmware...

~Cheers

No probs, glad I could help :)

Ratkat

04-12-2006, 10:38 AM

Ok...so I can delete the part about NSS...this is the way that I did it and thats why I wrote the guide like that because I know it works .....

I didnt try flashing without prior changing the code, so I didnt write the guide like that..

In any case it doesnt harm the product, and the firmware will then be chosen automatically for you ... maybe a little easier for people who are not too technically minded perhaps..

As you say it won't do any harm and the firmware will be chosen automatically.

I wasn't knocking your guide (which is excellent by the way), just answering your post regarding the function of NSS

Cash

04-12-2006, 10:41 AM

I wasn't knocking your guide (which is excellent by the way), just answering your post regarding the function of NSS

I know :)...but I find its good to question somethings anyway because more info can be gained that way :)..

Ratkat

04-12-2006, 01:56 PM

Cash

04-12-2006, 01:59 PM

So Cash as you flashed with the UK Country Variant 0543922,

if you hold down the # key does it change to silent profile, and then press again for back to general profile ?

mine didn't, so I reflashed it with Euro1 PB and it now changes profiles for the # key just fine

No it doesnt do that anymore when I hold it down :(..it just changes from numeric to alpha mode when I type to call somebody .. I guess this is for the SIP functions (did it do this before on the standard N80..I cant remember)

Nigma

04-12-2006, 02:21 PM

Cash

04-12-2006, 02:26 PM

Hi,
I can't get phoenix to run. As soon as i run the app, i get a splash screen flash then disappear. Followed by the standard windows error dialog asking if i want to send the results to Microsoft. The previos installs steps completed as describe in the guide. Any help would be much appriciated.

Thanks.

A.

Did you uninstall everything to do with Nokia ?

If not then sounds like you have a conflict with some other software, maybe try the virtual server route instaed http://www.vmware.com/products/server/

I never tried this so cant give you any advice ..

wolverine1982

04-12-2006, 02:43 PM

can i ask the difference between apac and emea?

i used the emea 0539548 EURO 2 Patina Bronze Internet Edition, on my n80, which was originally orange branded, then flashed to generic version using the nss and nsu meathod, which i have been using for a few months, then flashed to internet edition using phoenix with above mentioned code yesterday.

was pretty straight forward, part from downloading all the software, which cash has put nice links up for. :)

also got rid of the back cover with annoying orange logo and got brand new original nokia cover from www.mobilefun.co.uk.

Cash

04-12-2006, 02:55 PM

can i ask the difference between apac and emea?

well apac is for asia and pacific region, and obviously will be tuned for the mobile market and languages there, and emea is for the European market, middle east (Ithink and maybe america).

if you flashed with apac firmware you may not be able to use the NSU..(I may be corrected here)

Nigma

04-12-2006, 04:05 PM

Excellent, Thanks for the help.
Managed to get it working by also installing the Series 60 SDK which I previously missed. After installing everything I restarted. Did the Pheneox stuff, restarted and it all works now.

Quick question.... I flash in the EURO 1 Perl Black... But what's the differences between EURO1, EURO2, EURO3 and the two UK images?

Thanks,
A.

Dirty^Dog

04-12-2006, 06:59 PM

I have tried to update the firmware in Phoenix, but in the "Code" list nothing appears, and i cant insert anything manual.. i can find my phone on the botton line..

http://wp.frispor.com/nokia.gif
anyone experienced this before who can help me? :)

theshankleton

04-12-2006, 09:10 PM

Hi there,

Does anyone have a guide how to restore a dead phone using phoenix?

Cash

04-12-2006, 09:24 PM

I have tried to update the firmware in Phoenix, but in the "Code" list nothing appears, and i cant insert anything manual.. i can find my phone on the botton line..

anyone experienced this before who can help me? :)

Did you change the code in your phone with NSS first before you connected to pheonix ?
?

Cash

04-12-2006, 09:25 PM

Hi there,

Does anyone have a guide how to restore a dead phone using phoenix?

Sorry I cant help you, I dont have experience with dead phones yet ...

micscave

04-12-2006, 10:14 PM

micscave

04-12-2006, 10:17 PM

radioahead

04-12-2006, 11:25 PM

Just wanted to add to the balance on this thread - I've flashed successfully tonight. Thanks to all the really helpful posters on the N80i and v4 threads.

dez_borders

05-12-2006, 08:13 AM

Hey cash
tried to flash my mates N80 today, got to 100% then says flash failed. Now it's dead. It says in the reaper guide that there are dead flash instructions but I can't get them to open. Any ideas ?

Cheers

Try a hard reset

Power off the phone
Hold GREEN, 3 and *
Power on phone and wait 30 seconds (still holding the three buttons above)

johnnytanki

05-12-2006, 08:19 AM

i am in Singapore, wondering which product code should i use. Will it be ok if i select Australia? Please advise. thanks

Juz

05-12-2006, 08:43 AM

Cash

05-12-2006, 09:24 AM

Yo cash,

I din mange to even install phoenix, the bypass don't work for me. I've did it a fast as possible to click retry then install bypass then yes to all, instead the retry thingy still pops up.

FYI, I'm using Win 2k SP4...please advise.

Thanks!

Not too sure on the win 2k, but I think I read somewhere about problems installing on that OS...can you not get access to an XP machine ?

Cash

05-12-2006, 09:28 AM

Hey cash
tried to flash my mates N80 today, got to 100% then says flash failed. Now it's dead. It says in the reaper guide that there are dead flash instructions but I can't get them to open. Any ideas ?

Cheers

Hi Mic,

Sorry I cant help here .. I have had no experience with bricking a phone and then having to remedy, all the phones I flashed so far have thankfully flashed first time and OK, So I cant really advise on what you need to do.

There are others here who have managed to bring their dead phones to life .. I think Dez has some experience with this and I am sure he or others can advise better than me ...

Hope you get it working

05-12-2006, 10:19 AM

Cash

05-12-2006, 10:28 AM

Thanks for the detailed instructions. Just managed to flash my phone with 0539363 EURO 1 Pearl Black Internet Edition. Havent started using it yet but hopefully everything works. The # key still works to switch to/from Silent/Normal profiles.

One question (or obervation) - instructions say that the phone has (or recommended) to be fully charged. I was charging my unit using a USB charger and forgot to remove it when i started the flashing process - i hope it hasnt somehow wrecked anything inside. So far everything still works.

Thanks again Cash - you rock!!!!

Cheers ag :)

I dont think anything would be damaged inside your phone...I think its just incase there may be a power surge or something that would disrupt the flashing process..

Now you need to get truphone to take advantage of the N80i :)..

Maarten

05-12-2006, 12:30 PM

Hi,
I can't change the operation mode to normal (in phoenix).
So I can't update my phone... because it's in the wrong operation mode.

Can anyone help me please??

mcsleazycrisps

05-12-2006, 01:28 PM

Leave the SIM in, phone on and on General.

Maarten

05-12-2006, 01:31 PM

Try a hard reset

Power off the phone
Hold GREEN, 3 and *
Power on phone and wait 30 seconds (still holding the three buttons above)

I also tried to flash my phone, at 80% I got an connection error message. Now my N80 is dead.

I tried to reset my phone as you suggested. But it didn't help.

Are there any other solutions???

05-12-2006, 02:55 PM

Cheers ag :)

I dont think anything would be damaged inside your phone...I think its just incase there may be a power surge or something that would disrupt the flashing process..

Now you need to get truphone to take advantage of the N80i :)..

Cool. I've got Gizmo on and tested - lags a little but otherwise ok. Not as good as Skype i feel but since Skype isnt on the N80, it's as good as i can get now. Only challenge now is to get my mates to get on Gizmo so I can benefit from it. At the moment, everyone's on Skype.

livfc

05-12-2006, 10:02 PM

For those who have bricked their phone, I successfully revived mine by following the guide by WPKenny on this url http://www.allaboutsymbian.com/forum/showthread.php?t=53110&page=4. I used is modified instructions and not the ones given in the PDF. Now have a fully working N80 IE :)

dez_borders

06-12-2006, 07:55 AM

I also tried to flash my phone, at 80% I got an connection error message. Now my N80 is dead.

I tried to reset my phone as you suggested. But it didn't help.

Are there any other solutions???

Unfortunately because the flash failed at 80% instead of 100%, your phone is almost certainly now in a condition that only trained Nokia Service Engineers can repair.

If you got your phone through a UK Network contract, phone your mobile operator and just claim it stopped working. They will advise you what their returns process is, or tell you where your nearest Nokia Care Centre is located.

Provided you have the original invoice or despatch note for the handset, the repair will be free of charge. If you bought the phone off eBay contact the seller and ask them if they are willing to send you the original invoice, or have the handset repeaired on your behalf.

Alternatively,... older versions of Phoenix contained a dead-phone flash function. I still have the setup files for Phoenix 2004 and could upload them to rapidshare for you tonight. However i am not 100% sure if this version (a) has the Dead Flash Mode and (b) supports the N80. It's up to you if you want to try or not. I doubt you can make the N80 any more dead than it already is.

Best of luck!

kh0sa

06-12-2006, 08:39 AM

Hih

06-12-2006, 08:57 AM

Hi!

I have the same problem too, Nemesis wont detect my N80. When installing Nemesis I can not see USB drivers to be installed. Any ideas? :rolleyes:

Regards,

HiH

kreso

06-12-2006, 09:28 AM

Flash my N80 lat night. All seems to work OK. It was lock free (01). Now it is N80I PB (01)
EDIT: I did not change the CODE with NSS. Phoenix warn about it and modify the code
during the proccess

YTEASE

06-12-2006, 11:11 AM

Just thought i'd mention. If you have previously flashed the firmware before, to remove previous firmwares from your computer, Thus eliminating the chance of phoenix not selecting the right combination of files

pobz

06-12-2006, 11:42 AM

Sucessfull flash here too,
Many thanks for guide & links!

Ratkat

06-12-2006, 12:54 PM

I also tried to flash my phone, at 80% I got an connection error message. Now my N80 is dead.

I tried to reset my phone as you suggested. But it didn't help.

Are there any other solutions???

Cash.

Something that it might be worth adding your guide

'Once you have connected your phone via pop port/usb to your computer, don't under any circumstances touch or move the phone or usb lead until the flashing is complete'

Nokia 'Pop Port' is a very poor connection method and the slightest movement can disconnect it, thankfully the forthcoming N95 is moving to the much more reliable 'mini USB'

vijushi

06-12-2006, 02:10 PM

Ok some people aksed for it so here it is including all downloads that work..

This is for European but you can use the APAC firmware instead if thats what you require

Firmware Euro

EMEA 15.00 Package:
http://www.megaupload.com/es/?d=ZTNNMFKD

EMEA 15.01 Update:
http://www.megaupload.com/es/?d=NHV66BID

Firmware APAC

http://rapidshare.com/files/5106380/N80_RM-92_IE_APAC_PR_v15.00_SW4.0632.0.38.rar

Pheonix

http://rapidshare.de/files/35244159/phoenix_service_sw_2006_34_2_156.exe

Diego, cracks, reaper

http://rapidshare.com/files/5943056/Diego_dongle_crack_pheonix_crack_reaper.rar

NSS

http://rapidshare.com/files/5911866/nss10383.rar

Instructions

First change product code with NSS to allow flashing to N80i

1, install NSS and run
2, plug in phone and select "pc suite" on phone
3, in NSS click "scan for new devices"
4, Click phone info
5, click enable product code and enter 0543922 (this is for Euro with English but other codes are below, if you want apac then remeber to use the apac firmware)
6, Click "write"
7, when complete unplug phone and exit NSS

UNINSTALL ALL RELATED NOKIA PROGRAMS AND DRIVERS, THIS INCLUDES NSS, PC SUITE, CABLE DRIVERS AND ANY PREVIOUS INTALLATIONS OF DIEGO, PHEONIX ETC.

Now run the 2 firmware files, 15.00 first and then 15.01 ( this is for euro)

Now to install pheonix

1, Run reaper, all instructions are included within reaoer, you dont have to download anything because all files are included here.

2, Follow instructions "how to install pheonix" (skip the download files part)

3, install Diego

4, open pheonix dongle crack (double click on it but dont install yet)

5, install pheonix untill it prompte for dongle not found.

6, click "retry" and run crack immediately and press "yes to all" in new window that opens, if done correctly then pheonix will continue to install normally, if you didnt do this correctly then close current pheonix installation and re-start pheonix installation from step 4 above - YOU HAVE TO DO THIS STEP VERY VERY QUICKLY OR PHEONIX WILL NOT INSTALL AND YOU WILL HAVE TO TRY AGAIN.

7, It may stop installing pheonix with "DESkey not found" click on yes twice then it will continue to register dll files (in some cases you will not get this message untill after you restart your computer if prompted after installation)

8, restart your computer.

9, copy pheonix crack and framework.dll into pheonix folder (this is the folder that you installed pheonic into . probably C:\Program Files\Nokia\Phoenix (but this may be different on your PC)

10, Run pheonix and enter your details...now pheonix will work.

To install firmware into your phone

1, back up your phone to the memory card, and then remove the memory card and sim

2, turn on phone and accept to use without sim

3, connect phone to PC with USB cable and select PC Suite

4, wait while the drivers are installed

5, you should have the latest firmware pages..if not then download via reaper

USB Flashing for N80

MAKE SURE YOU HAVE FULLY CHARGED BATTER (VERY IMPORTANT)

1, run pheonix and click file ->manage connections
2, click on the new button
3, tick USB and click next
4, it will find the handset connected via USB and click on next
5 it will display USB and click finish
6, Now place USB on top and click on apply -> close
7, click on file -> scan product
8, you will notice the handset has been detected, (look at the very bottom line of the window to see the phone info)
9 click on flashing -> sw update
10, select your product code (the code previously eneterd in NSS above) and click start
11, now pheonix will flash your phone...leave your phone alone and do not dissconnect the usb cable as this will damage your phone.
12, after flash is complete a message will say "USB flashing successfull", your phone will boot up and will take 1 - 3 minutes to start so be patient

YOU NOW HAVE n80I PHONE

Notice you will have an internet folder, after you restore from your memory card the internet folder will dissapear and contents will be in "my own" folder.

I take no responsibility for any damage caused to your phone, this is entirely at your own risk, and this will also probably void your warrantee.

Product codes

Here are the product codes for both APAC and EMEA N80 Internet Edition

N80 Internet Edition Rm-92 APAC
================================

0539367 HONG KONG Pearl Black Internet Edition
0539857 TAIWAN Pearl Black Internet Edition
0539858 APAC 1 Patina Bronze Internet Edition
0539859 APAC 1 Pearl Black Internet Edition
0539910 THAILAND Pearl Black Internet Edition
0540588 AUSTRALIA Patina Bronze Internet Edition
0540589 INDIA Patina Bronze Internet Edition
0540654 NEW ZEALAND Patina Bronze Internet Edition
0540779 PHILIPPINES Patina Bronze Internet Edition
0540782 INDONESIA Patina Bronze Internet Edition
0540783 THAILAND Patina Bronze Internet Edition
0540839 APAC 1 Smooth Stainless Internet Edition
0540841 THAILAND Smooth Stainless Internet Edition
0540843 AUSTRALIA Pearl Black Internet Edition
0540845 NEW ZEALAND Pearl Black Internet Edition
0540859 INDONESIA Pearl Black Internet Edition
0540860 PHILIPPINES Pearl Black Internet Edition
0540861 INDIA Pearl Black Internet Edition
0540862 PHILIPPINES Smooth Stainless Internet Edition
0540863 INDIA Smooth Stainless Internet Edition
0540864 AUSTRALIA Smooth Stainless Internet Edition
0540865 NEW ZEALAND Smooth Stainless Internet Edition
0540866 INDONESIA Smooth Stainless Internet Edition
0541538 TAIWAN Smooth Stainless Internet Edition
0541542 HONG KONG Smooth Stainless Internet Edition

N80 Internet Edition Rm-92 EMEA
===========================

0539362 ALPS Patina Bronze Internet Edition
0540868 ALPS Pearl Black Internet Edition
0542289 BALKANS Patina Bronze Internet Edition
0543252 BALKANS Pearl Black Internet Edition
0541428 BALTIAN Patina Bronze Internet Edition
0541440 BALTIAN Pearl Black Internet Edition
0542808 CIS, BULGARIA Patina Bronze Internet Edition
0542811 CIS, BULGARIA Pearl Black Internet Edition
0538301 EURO 1 Patina Bronze Internet Edition
0539363 EURO 1 Pearl Black Internet Edition
0539548 EURO 2 Patina Bronze Internet Edition
0539712 EURO 2 Pearl Black Internet Edition
0539473 EURO 3 Patina Bronze Internet Edition
0544109 EURO 3 Pearl Black Internet Edition
0539646 FRANCE Patina Bronze Internet Edition
0540867 FRANCE Pearl Black Internet Edition
0542814 GREECE, CYPRUS Patina Bronze Internet Edition
0542816 GREECE, CYPRUS Pearl Black Internet Edition
0539672 GULF Patina Bronze Internet Edition
0542489 GULF Pearl Black Internet Edition
0539673 ISRAEL Patina Bronze Internet Edition
0514757 ISRAEL Pearl Black Internet Edition
0542487 LEBANON Patina Bronze Internet Edition
0542488 LEBANON Pearl Black Internet Edition
0514753 MOLDAVIA, BELARUS Patina Bronze Internet Edition
0514755 MOLDAVIA, BELARUS Pearl Black Internet Edition
0514751 ROMANIA Patina Bronze Internet Edition
0514752 ROMANIA Pearl Black Internet Edition
0539652 RUSSIA Patina Bronze Internet Edition
0542699 RUSSIA Pearl Black Internet Edition
0539648 SCANDINAVIA Patina Bronze Internet Edition
0541439 SCANDINAVIA Pearl Black Internet Edition
0542490 SOUTH AFRICA Patina Bronze Internet Edition
0542525 SOUTH AFRICA Pearl Black Internet Edition
0539897 TURKEY Patina Bronze Internet Edition
0541690 TURKEY Pearl Black Internet Edition
0542703 UKRAINE Patina Bronze Internet Edition
0542810 UKRAINE Pearl Black Internet Edition

I tried 3 time all times everyting work fine untill last stage of USB Flashing end up with below mention error when I hit

flashing -> sw update>>enter product code 0543922 >> start

ERROR is :

Changing phone's operation mode failed
do you want to retry?

HRESULT 0x80043005(-2147209211)

CMtcFFN:Setcurrentmode, transition not allowed;mtcfn=0x80043005

Only changes I see from standard procedure . during phonix installtion i have block internet access to application called "Root" .and removing sim and Memory card when i reboot my cell i ask for nothing (use without SIM etc).
Do i have to select any profile during flashing? i tried general and offline both did not work. any suggestion?.

thanks in advance.

dez_borders

06-12-2006, 06:16 PM

I cant get the NSS program to change the product code... I know ratkat says its not necessary, but considering that I'm UNABLE to do it I'm worried that I shouldn't go on until I'm atleast able to perform this step.

Anyone?

Don't worry, if you flash with Phoenix 2006, just select the relevant product from the Software Flash menu - e.g. Euro 1 Black or Euro 1 Silver etc.

Phoenix will warn you that the code is different from the one in the phone, but if you click YES to continue, it will change it after the flash is complete.

dez_borders

06-12-2006, 06:18 PM

I tried 3 time all times everyting work fine untill last stage of USB Flashing end up with below mention error when I hit

flashing -> sw update>>enter product code 0543922 >> start

ERROR is :

Changing phone's operation mode failed
do you want to retry?

HRESULT 0x80043005(-2147209211)

CMtcFFN:Setcurrentmode, transition not allowed;mtcfn=0x80043005

Only changes I see from standard procedure . during phonix installtion i have block internet access to application called "Root" .and removing sim and Memory card when i reboot my cell i ask for nothing (use without SIM etc).
Do i have to select any profile during flashing? i tried general and offline both did not work. any suggestion?.

thanks in advance.

Usually changing the phone to GENERAL profile and leaving the SIM CARD in prevents this error.

ikdo

07-12-2006, 10:56 AM

Hi Gang,

I am scared shitless when it comes to using Pheonix. I wonder if it's possible to change the product code in NSS and then update the firmware with NSU. I guess it also depend if Nokia has the firmware for N80ie on the upgrade link. I hope some1 can shed some light.

Cheers,

ikdo

Flash my N80 lat night. All seems to work OK. It was lock free (01). Now it is N80I PB (01)
EDIT: I did not change the CODE with NSS. Phoenix warn about it and modify the code
during the proccess

Ratkat

07-12-2006, 11:39 AM

Hi Gang,

I am scared shitless when it comes to using Pheonix. I wonder if it's possible to change the product code in NSS and then update the firmware with NSU. I guess it also depend if Nokia has the firmware for N80ie on the upgrade link. I hope some1 can shed some light.

Cheers,

ikdo

Yes it is possible and no the N80IE firmware is not currently avialable on the NSU

To be honest once the software is installed Pheonix is as easy to use as the NSU and to be honest is in my view safer than the NSU

I have heard more 'brick' stories from people updating with the NSU than through Pheonix.

Cash

07-12-2006, 11:48 AM

Cash

07-12-2006, 12:05 PM

To be honest once the software is installed Pheonix is as easy to use as the NSU and to be honest is in my view safer than the NSU

I have heard more 'brick' stories from people updating with the NSU than through Pheonix.

I agree with this.....

Freaker67

07-12-2006, 02:21 PM

dez_borders

07-12-2006, 07:04 PM

Woohoo.... again an new proud owner of a upgraded N80ie. Worked without any probs and had to do the flashing twice because of missing dutch language in the EURO1 pack.

Now quickly continuing with voip, truphone and restoring all my old installed stuff.

BTW, did anyone restored data from its mem card or pc suite backup files ?

Thanks for sharing all the knowledge and tools,

F

There's been a warning posted in AAS forums that restoring a backup made in a previous FW can cause minor problems... best to use PC Suite to re-sync your contacts etc.

janoflan

07-12-2006, 07:22 PM

dez_borders

08-12-2006, 08:33 AM

I've already got a working 2006 Phenoix on my computer, do I need to uninstall that before downloading and extracting the 2 firmware versions?

And by running the firmware do you mean extracting it? Or is it actually an .exe file?

thanks

You probably don't have to do this, but my own best practice is to delete the folder c:\program files\nokia\phoenix\products\rm-92 to completely remove old firmware before extracting a new N80 firmware for use with Phoenix.

When people talk about running the firmware, they almost certainly mean double clicking the exe to extract it from the distributable package to the above folder. You need to launch Phoenix to actually flash the firmware into an N80.

One additional thing, I read somewhere that Nokia's changelog recommends upgrading to Phoenix 2006.34.2.156 for full compatibility with the IE firmware. I certainly always follow this advice as I don't want to risk bricking my phone. What versions of Phoenix 2006 did other forum users flash IE with?

hkchamp

08-12-2006, 08:56 AM

what does APE->INFO:Ppub keys not programmed to phone mean? got this from phoenix but my phone is ok

Cash

08-12-2006, 09:03 AM

what does APE->INFO:Ppub keys not programmed to phone mean? got this from phoenix but my phone is ok

I got this also when I flashed a friends phone, but its working fine ..not sure what the error means though ..

edd080

08-12-2006, 10:44 AM

edd080

08-12-2006, 06:25 PM

can anyone help me out ? :con?

dez_borders

08-12-2006, 06:40 PM

Hi, tried searching something similar but i couldnt find anything, i currently have a Nokia N80-1 the firmware is V 4.0623.0.42 20-9-2006 Rm-92 Nokia N80 (14) which i guess must be a chinese firmware version or something of that sort. Is it possible for me to update it to a european version or can i just leave it as it is what would you recommend ?
Thanks for any help.

Hi Edd,

You can flash any language you wish into your N80. Just select one of alternative Product Codes from the Software Flash Menu of Phoenix 2006.

Cheers,
Dez

edd080

08-12-2006, 06:43 PM

Thanks for your reply Dez, would you recommend upgrading it though,or should i remain with this software?

dez_borders

08-12-2006, 07:00 PM

Thanks for your reply Dez, would you recommend upgrading it though,or should i remain with this software?

If you are happy with the languages available in the variant you have, you may as well leave things as is - every FW flash has the potential to brick your phone if somthing goes wrong - e.g. Computer crash, USB cable disconnect.

There seems to be a Firmware release every 6-8 weeks for the N80 at present, so you could wait until the next release, then change to a UK or Euro variant.

edd080

08-12-2006, 07:06 PM

dez_borders

08-12-2006, 10:42 PM

Thanks Dez i guess i will wait as i dont have any problems with the firmware till now, are the new firmware versions posted here or is there a link from where to check for updates? sorry for asking all these questions but all this is new to me :redface:

You will read about it on these AAS forums a few days (or less) after any new FW release... but if you find info elsewhere about any releases, feel free to start a new thead here on AAS.

edd080

08-12-2006, 10:58 PM

I will thanks for your help! :icon14: :)

edd080

09-12-2006, 12:14 AM

Hi Dez, i couldnt resist to try and update my N80 and yes i went step by step and managed to update it without any problems so far,except that whils the flashing i got 'Papub information not passed to mobile' or something similar, any idea what this might mean? I would like to thanks Cash also for providing the instructions, really great job, keep it up!! :icon14:

bjarke

09-12-2006, 06:13 PM

Would it be possible to change the key with NSS and then upgrade with Nokia's updater app ?

Cash

09-12-2006, 06:42 PM

Would it be possible to change the key with NSS and then upgrade with Nokia's updater app ?

No..the N80i firmware is not available yet on the NSU.... otherwise we would all be doing it :)..

edd080

09-12-2006, 06:53 PM

HI Cash thanks for those instructions you posted really great job,keep it up :icon14:

Cash

09-12-2006, 09:16 PM

HI Cash thanks for those instructions you posted really great job,keep it up :icon14:

No probs :)..we are all here to help each other :)..

Jay3gsm

10-12-2006, 04:53 PM

Ratkat

10-12-2006, 05:41 PM

Can someone post up a new link to the Phoenix software. I got the rest, but Rapidshre is an awful service at best of times and I can't download, despite having a premium account paid for.

Many thanks.

There are 2 Rapidshare's

Rapidshare.com and Rapidshare.de

Both require you to subscribe to their own premium service, you can't for example use a .com login on the .de site

enter4o

11-12-2006, 10:41 AM

Hi everybody,

I bought N80 because it has VoIP but when i try to login to gizmo ot voipbuster nothing happens.

I decidet that may be i should update my firmware with NSU after that i download an update trought my wireless network from its menu an version of FW was 4.0623.0.42 but again i received message "failed to register" in my sip profiles.

I read in other forums how to change my firmware but i didn't look what version I'm trying to install. When I start flashing it's tell me that i try to install an older version 3.xxxx.x.xx and phone rang the bell.

After that I bring it to nokia local service center and tell them what happens because i don't have warranty. I told them that i want SIP working. They take me 15 euro to repair it and tells me to update it trought wireless after i get home. Gess what? Of course it didn't working with SIP.

Ok now on my questions...

Is FW from N80 IE will work with SIP?
What is the latest version of N80IE FW, because i know latest version is 4.0623.0.38?

My N80 FW now is 4.0623.0.42.
Is it possible to get the same erorr if I try to install N80IE FW 4.0623.0.38, or I must wait for a newer firmware?

Thanks in advance!

vin_eme

11-12-2006, 11:41 AM

Hi Enter,

even i have installed the latest IE firmware....installed Gizmo Voip.....when i tried to connect for the first time...it worked and i was able to make a successful voip call to the US. Then after when ever i tried to connect i always get this message "Unable to connect to the connection network" . I tried to contacted the Gizmo support....waiting for their response...i dont know if others are also facing this problem with Gizmo SIP....

~Cheers

Cash

11-12-2006, 12:00 PM

enter4o

11-12-2006, 05:51 PM

I want to try IE FW but i don't want to get this erorr again. I want to know is there someone who has successful changed firmware from N80 4.0623.0.42 to other version of N80 IE

I have and other problem after nokia service center installed the latest N80 FW.
It's show me white screen when i browse phone menu too fast or watch something

shinmeister

11-12-2006, 09:31 PM

shinmeister

11-12-2006, 09:32 PM

dez_borders

12-12-2006, 07:50 AM

The links for phoenix and Diego seem to be broke? see below:

Pheonix

http://rapidshare.de/files/35244159/...6_34_2_156.exe

Diego, cracks, reaper

http://rapidshare.com/files/5943056/...ack_reaper.rar

Can someone (Cash??) repost the correct links?

Cheers.

Working links are on page 4 of this thread...

Cash

12-12-2006, 08:05 AM

Jay3gsm

12-12-2006, 08:55 AM

Every time I've tried, since Saturday evening, I get 'Download session expired' error messages when trying to download phoenix. This is from different PC's using different ISP's.

Cash

12-12-2006, 09:19 AM

Every time I've tried, since Saturday evening, I get 'Download session expired' error messages when trying to download phoenix. This is from different PC's using different ISP's.

I just tried again and its working fine ...are you trying the links from the first post ?

shinmeister

12-12-2006, 10:51 AM

I just tried again and its working fine ...are you trying the links from the first post ?

Working this time....must have been something up with the server when I last tried.

My mobile gave birth this morning to a very healthy V 4.0632.0.38 (Euro 1 Pearl Black) :icon14:

Thanks for everyone's help, especially Cash for the excellent instructions

Cash

12-12-2006, 11:22 AM

Thanks for everyone's help, especially Cash for the excellent instructions

No probs :)..always happy to help :)..

Jay3gsm

12-12-2006, 11:41 AM

I still get the invalid file message as before. Can't understand the reasons why. It's only Phoenix, everything else downloaded ok.

dunarea

12-12-2006, 02:54 PM

Hi,
I can't get phoenix to run. As soon as i run the app, i get a splash screen flash then disappear. Followed by the standard windows error dialog asking if i want to send the results to Microsoft. The previos installs steps completed as describe in the guide. Any help would be much appriciated.

Thanks.

A.
I spent an entire day trying to get Phoenix to work. Then the next day i woke up and installed a fresh windows on a different partition. Installed Diego and then installed Phoenix. Flashed my phone. Everything worked perfect. I think if you had Nokia PC Suite before, you may encounter problems installing Phoenix. Should have no problems on a clean PC.
Good luck!

enter4o

12-12-2006, 08:39 PM

Are there anyone who has successful flash fom N80 4.0xxx.0.42 to N80i 4.0xxx.0.38.

Can I make flash with NSS not with phoenix?

dez_borders

12-12-2006, 08:49 PM

I spent an entire day trying to get Phoenix to work. Then the next day i woke up and installed a fresh windows on a different partition. Installed Diego and then installed Phoenix. Flashed my phone. Everything worked perfect. I think if you had Nokia PC Suite before, you may encounter problems installing Phoenix. Should have no problems on a clean PC.
Good luck!

Hi Dunarea,

I find that as long as you do all of the following you don't need to reinstall windows to (re)install a working copy of Phoenix...

1. Uninstall Phoenix, Diego, and ALL Nokia Apps using the Add/Remove Programs applet in the control panel.
2. Launch Windows Explorer and DELETE C:\Program files\Nokia (and all others folders beginning with or containing "Nokia")
3. Reboot the PC before trying to re-install Phoenix.

dez_borders

12-12-2006, 08:54 PM

Are there anyone who has successful flash fom N80 4.0xxx.0.42 to N80i 4.0xxx.0.38.

Can I make flash with NSS not with phoenix?

Hi,

1. Yes, you can flash with NSS, but I have never tried it myself, I prefer Phoenix.

2. You can only flash upwards and not downwards in versions of FW so the xxx in your example is more significant than the 42 to 38 bit...
e.g. You could flash from 4.0623.0.42 to 4.0632.0.38
but you cannot flash from 4.0632.0.38 to 4.0623.0.42
...And the first character of the firmware number is even more significant than the others...
e.g. You could flash from 3.0617.0.38 to 4.0001.0.10 (if it existed!),
but you could never flash from 4.xxxx.x.xx to any 3.xxxx.x.xx FW.

Hope that makes sense?

enter4o

12-12-2006, 09:04 PM

Hi,

1. Yes, you can flash with NSS, but I have never tried it myself, I prefer Phoenix.

2. You can only flash upwards and not downwards in versions of FW so the xxx in your example is more significant than the 42 to 38 bit...
e.g. You could flash from 4.0623.0.42 to 4.0632.0.38
but you cannot flash from 4.0632.0.38 to 4.0623.0.42
...And the first character of the firmware number is even more significant than the others...
e.g. You could flash from 3.0617.0.38 to 4.0001.0.10 (if it existed!),
but you could never flash from 4.xxxx.x.xx to any 3.xxxx.x.xx FW.

Hope that makes sense?

Thank a lot. I already know that I can't flash from 4.xxxx.x.xx to 3.xxxx.x.xx.
Last month i went to nokia service center because I forget to compare the two versions.

Now my N80 has 4.0623.0.42 and the newest N80i FW is 4.0632.0.38 thats mean that I should have a successful flash, shouldn't I?

enter4o

12-12-2006, 09:27 PM

I have one question more.

Because I don't know which firmware is better for 0539363 or for 0542811. If I install the first one is it possible after that to reinstall the second one. They both are equal versions.

Cash

13-12-2006, 01:22 AM

Hi,

1. Yes, you can flash with NSS, but I have never tried it myself, I prefer Phoenix.

Hey Dez....

Its only possible to flash with NSS if you have the Dongle bypass ... I have never managed to find this, if any body has it would be Interesting to know about it ..

dez_borders

13-12-2006, 08:08 AM

Thank a lot. I already know that I can't flash from 4.xxxx.x.xx to 3.xxxx.x.xx.
Last month i went to nokia service center because I forget to compare the two versions.

Now my N80 has 4.0623.0.42 and the newest N80i FW is 4.0632.0.38 thats mean that I should have a successful flash, shouldn't I?

I successfully flashed from 4.0623.0.42 to N80IE 2 weeks ago. ;)

dez_borders

13-12-2006, 08:10 AM

Hey Dez....

Its only possible to flash with NSS if you have the Dongle bypass ... I have never managed to find this, if any body has it would be Interesting to know about it ..

Hi Cash,

Many thanks for clarifying the issue.

I have never tried to flash with NSS so although I knew the program was capable of doing it I didn't know it also required a dongle.

Anyway, I don't think anyone will improve on Nokia's own Phoenix suite so I will stick to that for FW flashing, as it's never let me down.

Jay3gsm

13-12-2006, 03:10 PM

Just a quick thanks to all the guys who posted information here. I've finally managed to upgrade my N80 to the N80ie.

andricop

13-12-2006, 10:20 PM

enter4o

14-12-2006, 06:54 AM

Hello,

I would like to know if it's possible after upgrading from N80 to N80i to downgrade to N80 again ? With Phoenix ?

Other question : how to find the actual product code of your phone ?

Thanks for your time and help !

Regards

Nowadays it's not possible you to downgrade form N80i to N80. If you try you will damage the phone. There are two ways to downgrade. First is to wait until nokia make newer firmware than 4.0.632.0.38 for N80 and the second is Nokia Service Center.

You can find actual product code of your phone under the battery.

n80dileo

14-12-2006, 05:05 PM

6, click "retry" and run crack immediately and press "yes to all" in new window that opens, if done correctly then pheonix will continue to install normally, if you didnt do this correctly then close current pheonix installation and re-start pheonix installation from step 4 above - YOU HAVE TO DO THIS STEP VERY VERY QUICKLY OR PHEONIX WILL NOT INSTALL AND YOU WILL HAVE TO TRY AGAIN.

Hi Cash
thanks for your guide. For me worked well!.
I had just a problem with the phoenix crack (dongle).
I have a Win 2000 pc.
The default directory of phoenix crack is c:\\windows\system32
I was unable to complete the installation until I discovered that on my win 2000 the correct path is c:\\WINNT\system32.
I'm a mac user and perhaps this is a "normal" things to change for win users but I really lost a lot of time trying to click "fast and furious" on retry and install buttons.

Hope this info will help another "dummy" pc user like me ! :-)
leo

jayholler

15-12-2006, 06:04 AM

Hi all,

I was able to DL everything but the 90034285_RM-92_IE_EMEA_PR_dp_v15.01_SW4.0632.0.38
file.

I signed up for service and everything at megauploads, but still no luck. Am I doing something wrong, or is there another location for the file? I would also be willing to accept the file if someone was willing to send it to me, I'm not sure how large it is though.

Any suggestions would be great. In the meantime I'll keep trying.

dez_borders

15-12-2006, 08:20 AM

jayholler

16-12-2006, 04:30 AM

It's over 51Mb to soo large for Messenger or email. Try this link...

http://rapidshare.com/files/7560872/90034285_RM-92_IE_EMEA_PR_dp_v15.01_SW4.0632.0.38.exe

Thank you.

I did manage to finally get it working, and was able to successfully update my N80 purchased through an importer in NYC (by way of Hong Kong, apparently), to the N80ie. Sweet goodness, I love whoever made these apps available, and thanks to the author of this thread for the tutorial. It was impossible to screw this up with all the info you provided.

Until Nokia releases another update...

dez_borders

16-12-2006, 10:10 AM

Thank a lot. I already know that I can't flash from 4.xxxx.x.xx to 3.xxxx.x.xx.
Last month i went to nokia service center because I forget to compare the two versions.

Now my N80 has 4.0623.0.42 and the newest N80i FW is 4.0632.0.38 thats mean that I should have a successful flash, shouldn't I?

Yes, because 4.0623 is lower than 4.0632, you would be upgrading to 4.0632.

EliasMH

17-12-2006, 07:26 AM

Hi Guys I successfully upgraded my N80 to N80ie - Thanks to Cash's guidelines. Everything went ok, except for this message every time that I switch on my phone....

"Unable to complete installation from the Memory Card. To install remaining applications go to App.mgr"

I also have these strange copies under my AppManager.

I have been told somewhere to use a Card Reader and delete a folder named Uninstall.

I did that but this did not resolve the problem. Is there another way to do it or give me a directory using a Card Reader?? Thanks guys:mad:

dez_borders

17-12-2006, 09:06 AM

Freaker67

17-12-2006, 10:51 AM

pat_vrs

17-12-2006, 08:36 PM

After upgrade to IE there is 1 thing which remarkble is improved, WLAN recievement. First I could connect only on 1st floor or approx 10 metres. Now with IE I connect on 3rd floor or in open field over 30 metres. Walking through the city shows up much more (open) AP's.

Anyone has the same experience?

same here, wlan seem to be better
voip 100% working..

btw.. firmware upgrade was very easy...
but don't forget to FULLY charge your battery

johnnytanki

18-12-2006, 01:58 PM

hi bros,

With the guides, i had successfully flash my n80 to n80i. Really like it alot.

But now there is a question from me.

Previously during the flash, i use the product code from hong kong as i cant find the product code of my country. Now is there any way to change it to some other code after i had managed to locate the code? Will there be any concern of just changing the code if there is some way to do it. Thanks and hope to hear from all.

x-daemon

18-12-2006, 09:40 PM

thanks alot.
now i have a brand new n80ie

:icon14:

suy

19-12-2006, 12:07 AM

so, after you have upgraded to N80IE, what does change? I mean, can I still use PC suite? The phoenix software is unknown to me. Is it some "crack" program?
Do i need to keep on using it, after the upgrade? Or is there no differentce at all between an upgraded N80 to N80IE and an original N80IE.
My concern is, that when there are updates to the N80IE software, what I have to do then. I would like to continue the nokia software (pc suite) although it's maybe not the best software there is. And also concerned I will some time in the future a message when updating, that my (updated to N80IE) nokia will be refused by nokia update.... I know, technically, the N80 and N80IE are the same, but I guess, nokia software can discover which nokia was originally N80 or N80IE...

thanks for the info here ... I wished nokia had an upgrade path.... but, this will do also I guess...
Just a bit scared to ruin my expensive phone....

wareswez

19-12-2006, 06:57 AM

Hi Suy,

The answer to your question about pheonix:- Its just a program to force update the nokia n80 to be an n80ie. Pheonix and all the other programs can be unistalled after you have updated your n80, you can then reinstall PC Suite. As to the n80 updating question regarding nokia and refusing to support the n80ie (n80 forced to be n80ie) I am unsure on this as Nokia havent released an update for me to test this using the PC suite update facility. Before I updated my n80 to n80ie i used the nokia live update facility and it just updated my n80 to the latest n80 version (last night) and at that time I couldnt select N80ie on their phone list.

I then followed this guide and updated to n80ie, after updating i uninstalled pheonix and all the other programs and drivers etc and re-installed pc suite, all is working fine.

This process can kill your phone so if you do this and it fails then no one but you can accept or take responsibility. But I can say it worked fine for me and my phone is now n80ie fully working and with a lot more options and use than the n80 had.

Its all upto you.

hope this is of help

Wez

x-daemon

19-12-2006, 08:38 AM

@suy,

yes i can use nokie pc suite. i uninstalled all phoenix and diego etc. apps. then installed pc suite and synced with outlook with no probs.

btw, the font has been changed to the previous n80's firmware one. i mean, the version 3.xxx has this font type. after upgraded to v4.xx font was much more beautiful on n80, now we turned back to the old font type.. :(

it seems like that, this n80ie has been planned way ago, so the they used the old font type. what do you think?

kreso

19-12-2006, 11:43 AM

In my opinion it is not required to uninstall phoenix to install PC Suite. I'v done that and everything is working 100%. So now I have working Phoenix and PC Suite. Of course you cannot run both programs in parallel

Symbian Saddler

19-12-2006, 01:50 PM

acoolwelshbloke

19-12-2006, 02:04 PM

Don't shoot the newbie and I apologise in advance if I upset the regulars. I know newbies can be annoying as I'm a mod on a different MB altogether.

I am from the UK, I have a N80 and after 6 months am already on my third handset because the software kept freezing etc.

I thought I was quite up to date with technology but reading this thread makes me realise I'm not!

I would like to update the firmware software as my phone is starting to slow down again and it's so annoying. I might as well update to the N80 IE software in the process.

I appreciate the step by step guide above but some of the terms don't mean anything to me.

Could someone PM me please, so I don't annoy everyone the best way to go about things. I am nervous about trying any updates until I am completely happy I know what I'm doing.

PS - I understand the Nokia official website updates are a no-no, is that right?

Thanks

First of all what firmware do you have?
(Press *#0000#)

Also what network are you on?

To start off with if you flash to N80IE and something goes wrong then you have no warranty as you will have voided it. Also you can not flash back to your current version so you will be stuck with the N80IE and from what I have read there are quiet a few bugs with it!

Best thing is to update to via Nokia's website!

Or flash to the Nokia generic version which is what I did and my device has not crashed once since!

Symbian Saddler

19-12-2006, 02:29 PM

jedi134

19-12-2006, 03:25 PM

Symbian Saddler

19-12-2006, 04:06 PM

The official nokia updates are the ones to go for, they will not void your warranty, these will be on the nokia web site accessed through the software update facility in PC suite, The N80IE will void warranty as it has not officially been released yet, just try the official ones 1st and see how you get on. someone correct me if im wrong

by the way i am also on orange and had the old 3xxxx ver firmware, its was pants!!

Thanks again. Yes it is pants, and yet it's still far better than the previous software version I had.

Can a few more tell me if the official updates are ok before I go ahead. Any other advice would be welcome.

Thanks
Mark

wareswez

19-12-2006, 04:08 PM

I had no problems at all when i used the nokia update program, although it seemed to hang at around 75% for about 5mins which was scarey moment ;) but it worked fine other than the fear it put in me. If you are at all unsure about your warranty or whatever maybe take the phone to the shop you bought it from and get them to do the update , obviously they will not update it to n80ie but at least u will have the safety that if they mess it up u are under warranty :)

GL with it and hope it fixes your problems.

The nokia update worked for me, so thumbs up as far as i am concerned but technology is always touch and go , works for one person doesnt always work for the next

Wez

acoolwelshbloke

19-12-2006, 06:54 PM

Thanks for the reply.

My version is: V 3.0617.0.6, 03-05-2006

I am on Orange.

That's why I was worried to flash it because of the warranty. I'm not fussed about the N80 IE firmware if it has bugs.

A very stable N80 firmware update would suffice. I was warned that the Nokia updates are worst than most so I'm unsure about the official updates, especially as they would also void the warranty.

That explains it then!

Your running on v3, My phone came with that and it constantly crashed that was when it had finished running at a snails pace!

Upgrading to V4 makes such a difference, My phone has not crashed once since!

As somebody pointed out, just upgrade using the software provided on the nokia website. This will not void your warranty so if anything goes wrong your covered!

One thing I will point out is that the orange firmware is known to have many problems, if I was you flash it with generic software as I done and you will never look back!

Luxx

20-12-2006, 10:11 AM

Guys I need some help where can I update my firmware .
I wnt to megaupload something and rapid share , but I can't download it .
help?

The_Fellowship

20-12-2006, 07:57 PM

Hi

I'm unable to download (cannot find server error) the EMEA 15.00 Package:
http://www.megaupload.com/es/?d=ZTNNMFKD

Does anyone know how I can get hold of this file?

Can someone who has previously downloaded the file share it somehow?

Thanks

The_Fellowship

21-12-2006, 10:34 AM

It's ok now, the downloaded worked :)

x2srj

21-12-2006, 05:11 PM

Barreto

21-12-2006, 05:29 PM

I'm another happy upgrade to N80ie or whatever it's called.... mines actually a little bit quicker than before...

Now am I stuff if it stops working and I take it to a Nokia Service Centre? i.e. they know I've been messing about with the hardware...?

If they compare the product code that is writen in the label under the battery, with the new product code (for the internet edition), they will know that you did something to your phone..

dez_borders

22-12-2006, 04:31 PM

If they compare the product code that is writen in the label under the battery, with the new product code (for the internet edition), they will know that you did something to your phone..

Yes, but using NSS, you could change the product code back to match the label behind the battery... providing the phone works OK and responds to NSS.

jamaas

22-12-2006, 08:21 PM

dez_borders

22-12-2006, 08:47 PM

Thanks to all who have contributed. I've installed phoenix several times and keep uninstalling everything that looks remotelly connected with nokia but still when I try to run Phoenix I just get the splash screen and then windows error message. Is there a common cause of this, or a way to diagnose the problem? All suggestions most appreciated.

Thanks

Jim

Jim,

Was it this thread where I asked you if your PC has either of the following?
1. Dual Core Intel CPU
2. XP Media Center Edition.

My PC with both of the above does not work with Phoenix, same problems as you DESCRIBE. My Laptop has neither of the above and Phoenix works fine.

Is the above info of Any help to you?

enter4o

22-12-2006, 08:49 PM

Another successfull flash :D:D:D

I tried to install phoenih meny times, used many registry cleaning programs and nothing helps. Maybe only CClean is good, but i decide not to risk my phone and thats why I atached new HDD to my computer Install a fresh copy of Windows XP SP2 with chipset drivers video drivers and sound drivers, after that i Install phoenix exactly how it's explain in BB5 Reaper. I download all software from links from first post in this thread, and used Bulgarian version of Perl Black IE. Only thing that i warried about was surge current, but if you have UPS or Notebook, everything will be fine.
Now everything is good, phone start for the same time as old FW but operates faster in everything else, ohh and now I have Internet telephone.

jamaas

23-12-2006, 08:34 AM

Thanks dez

The computer is a single core dell d410 notebook running XP Professional but it seems many people have trouble cleaning all remaining programs off.

Will keep reading.

Jim

Was it this thread where I asked you if your PC has either of the following?
1. Dual Core Intel CPU
2. XP Media Center Edition.

shinmeister

23-12-2006, 10:20 AM

the uk nokia site has a support page for the n80ie - does this mean a uk launch is on the way?

or are they supporting us flashers?

The_Fellowship

23-12-2006, 12:51 PM

Hi

Has anyone manged to flash a N80 on the Three (UK) network?

i.e.

V3.0618.0.2
23-05-2006
RM-92
Nokia N80 (45.02)

Will it work on this handset or should I flash to the generic N80 firmware first?

Thanks for any help and advice

felixcatster1

23-12-2006, 03:59 PM

Hello,
I'm just about ready to flash my pearl black N80 to an N80ie using pheonix and the very good insructions to do so earlier in this thresd.
The one thing that I'm unsure about is:

"9, copy pheonix crack and framework.dll into pheonix folder (this is the folder that you installed pheonic into . probably C:\Program Files\Nokia\Phoenix (but this may be different on your PC)"

I can copy the 'framework.dll' to the folder
I'm just unsure which is the 'pheonix crack' to copy to the folder too, it's probably staring me in the face!

Please can somebody point me in the right direction?

Thank You Very Much in Advance

The_Fellowship

23-12-2006, 05:08 PM

felixcatster1

23-12-2006, 05:26 PM

Hello The_Fellowship

That's great I going to give it a go shortly,

Thank You Very much
for your advise. :) :)

electronicfur

24-12-2006, 02:32 PM

Does anyone know if you can use Phoenix to flash over bluetooth?

I ask because I'm at my folks for xmas, and forgot my usb cable...

cyberlipe

24-12-2006, 02:46 PM

Greetings All,

i'm new to this forum and to N80-1.

i have a question that i would need some advice on. but first let me tell you guys about my situation first.

I live in Brazil, and i just got this N80-1.
My operator is Brazilian TIM (GSM 1800mhz).
I bought the unlocked version of the phone.
My firmware is the lastest one available from NSU.
My product code is 0533239, wich seems to be a generic one, for brazil, with brazilian portuguese, PT-BR language pack.

i want to upgrade to N80IE, to improve the performance of the phone.
I was a proud owner of a Nokia 6230, and it was a faster phone, and i could change the track of the music player from the button on the headset, a thing that on N80 is only possible on FM Radio, not on music player as Nokia 6230.

but aside from that, the N80 is very slow responsive against Nokia 6230. That's why i want to firmware to N80IE, as people have been reporting that is has a better speed.

as you can see, i know english, and i could do without a phone with brazilian portuguese, but i need it so i have the predictive text input in brazilian portuguese, wich i use to send SMS to my mates.

so here comes my question. Can i upgrade my N80 to N80IE, and keep my brazilian language option on the phone (just because of Predictive Input)????????????????

Because from what i saw from region code listings, there is no Brazil in it, not even portugal. Yes, i know that there are EUROs option... but portugal portuguese language would do me no good. i need brazilian portuguese. For those who do not know, it is something like British English to American English (a little bit worse actually).

can anyone tell me what would be the best option for me, cause i want to upgrade, but i think i will loose the brazilian portuguese language pack.

Thanks in advance for reading all this, and for taking a time to help me.

steffi

24-12-2006, 04:31 PM

Is anybody able to use phoenix within bootcamp on a MacBook Pro then?

x-daemon

24-12-2006, 05:22 PM

Does anyone know if you can use Phoenix to flash over bluetooth?

I ask because I'm at my folks for xmas, and forgot my usb cable...

it is impossible for now :)

JuanK73

26-12-2006, 05:52 AM

Hi if I live in Mexico what firmware should I use ???

Thanks !

"This is for European but you can use the APAC firmware instead if thats what you require"
"Now run the 2 firmware files, 15.00 first and then 15.01 ( this is for euro)"
N80 Internet Edition Rm-92 EMEA
===========================

0539362 ALPS Patina Bronze Internet Edition
0540868 ALPS Pearl Black Internet Edition
0542289 BALKANS Patina Bronze Internet Edition
0543252 BALKANS Pearl Black Internet Edition
0541428 BALTIAN Patina Bronze Internet Edition
0541440 BALTIAN Pearl Black Internet Edition
0542808 CIS, BULGARIA Patina Bronze Internet Edition
0542811 CIS, BULGARIA Pearl Black Internet Edition
0538301 EURO 1 Patina Bronze Internet Edition
0539363 EURO 1 Pearl Black Internet Edition
0539548 EURO 2 Patina Bronze Internet Edition
0539712 EURO 2 Pearl Black Internet Edition
0539473 EURO 3 Patina Bronze Internet Edition
0544109 EURO 3 Pearl Black Internet Edition
0539646 FRANCE Patina Bronze Internet Edition
0540867 FRANCE Pearl Black Internet Edition
0542814 GREECE, CYPRUS Patina Bronze Internet Edition
0542816 GREECE, CYPRUS Pearl Black Internet Edition
0539672 GULF Patina Bronze Internet Edition
0542489 GULF Pearl Black Internet Edition
0539673 ISRAEL Patina Bronze Internet Edition
0514757 ISRAEL Pearl Black Internet Edition
0542487 LEBANON Patina Bronze Internet Edition
0542488 LEBANON Pearl Black Internet Edition
0514753 MOLDAVIA, BELARUS Patina Bronze Internet Edition
0514755 MOLDAVIA, BELARUS Pearl Black Internet Edition
0514751 ROMANIA Patina Bronze Internet Edition
0514752 ROMANIA Pearl Black Internet Edition
0539652 RUSSIA Patina Bronze Internet Edition
0542699 RUSSIA Pearl Black Internet Edition
0539648 SCANDINAVIA Patina Bronze Internet Edition
0541439 SCANDINAVIA Pearl Black Internet Edition
0542490 SOUTH AFRICA Patina Bronze Internet Edition
0542525 SOUTH AFRICA Pearl Black Internet Edition
0539897 TURKEY Patina Bronze Internet Edition
0541690 TURKEY Pearl Black Internet Edition
0542703 UKRAINE Patina Bronze Internet Edition
0542810 UKRAINE Pearl Black Internet Edition"

jamaas

26-12-2006, 11:16 AM

Thankis Nigma,
I'm having the same problem, any chance you could post what you did with the sdk to make it work?

Thanks

Jim

Excellent, Thanks for the help.
Managed to get it working by also installing the Series 60 SDK which I previously missed. After installing everything I restarted. Did the Pheneox stuff, restarted and it all works now.

Quick question.... I flash in the EURO 1 Perl Black... But what's the differences between EURO1, EURO2, EURO3 and the two UK images?

Thanks,
A.

kneo

27-12-2006, 02:20 AM

I got this error trying to flash my N80:

http://www.vigani.it/images/error.jpg

As you can see I created a new Virtual Machine and installed the required software only.

Any solution to this problem?

fukxou

27-12-2006, 04:47 AM

JuanK73

27-12-2006, 06:28 AM

Hi, I would like to flash my Nokia N80 to Internet edition, my question is this: If I use this firmware code "0539363 EURO 1 Pearl Black Internet Edition" and I live in Mexico, (I don't care about Spanish language) my phone will work fine here in Mexico ???

Or where could I get the correct firmware for my country ?
Please I'm new about this, need help,

Thanks !

dunarea

27-12-2006, 04:35 PM

It should work fine, don't see any reason why not. Regional packages differ in language packs and some applications (don't know exactly which one). But you shouldn't have any problem as long as you will use English, which i believe is found in each package.

cyberlipe

27-12-2006, 05:06 PM

JuanK73

27-12-2006, 06:40 PM

Barreto

28-12-2006, 02:06 AM

dez_borders

28-12-2006, 12:18 PM

I flashed my phone today after it finished flashing with phoenix it failed under the test mode. Phone is working fine and it registers as the newest firmware version. I don't really see anything different from the internet edition versus the older version I had. I did do a restore from memory card after i finish reflashing it. I did see a internet folder before i restored but afterwards it was gone.

Thanks for any comments

Yes, restoring a backup made in a previous FW will delete the Internet Folder and could also cause intermittent problems in use. I suggest you format the N80IE with *#7370# to reset the internal phone memory as an N80IE.

kneo

28-12-2006, 02:16 PM

skyhawk

29-12-2006, 07:39 AM

I am going to flash my N80 to N80IE. Could somoeone (that already have flashed it maybe) tell me the supported languages in the European firmware?

I will be at the safe side before i do anything with it. Its not a cheap mobile to waste, thats for sure...

skyhawk

31-12-2006, 02:16 AM

Nevermind. Flashed it already. Works fine

NMayling

01-01-2007, 10:44 PM

Think I may have bricked my phone

Working along ok until I got this

Ape->Programming: 88%
Ape->Programming: 89%
Ape->Programming: 90%
Ape->Programming: 91%
Ape->Programming: 92%
Ape->Programming: 93%
Ape->Programming: 94%
Ape->Programming: 95%
Ape->Programming: 96%
Ape->Data send failed. Resending. Make sure that the cable is connected
Ape->Data send failed. Resending. Make sure that the cable is connected
Ape->No response for write data received
Ape->Flashing failed
Flashing failed.
Flashing failed.
ADL USB Flashing Selected

Phone now wont turn on and isnt found by pheonix , anything I can do ? where to next ? ( anyone in central scotland able to do this for me ? )

hippy1970

02-01-2007, 12:16 AM

You do not need to change the product code with NSS prior to flashing with Pheonix, the product code will be changed automatically by Pheonix dependant on the firmware you choose.

The idea of changing the product code using NSS was to allow people to upgrade their 'branded' phones to a 'non branded' firmware using the official Nokia Update Service (NSU). For example if you had a Vodafone N80 and connected it to the NSU you would be told there were no updates, once you had changed the product code using NSS it was then possible to update to the latest firmware using NSU

I assume that installing a 'non branded' firmware would not unlock the phone for use on other networks but simply allow me to use a firmware that is not officially sanctioned by my service provider... correct?

steffi

02-01-2007, 02:24 AM

Has anybody successfully upgraded their N80 using phoenix on mac/intel hardware under bootcamp? Does phoenix work under bootcamp?

I assume that installing a 'non branded' firmware would not unlock the phone for use on other networks but simply allow me to use a firmware that is not officially sanctioned by my service provider... correct?

fdxd

02-01-2007, 02:27 AM

_Dx_

02-01-2007, 04:46 AM

well, maybe is not the best solution, but u can buy a J.A.F BOX (http://www.gsmserver.com/software/jaf_box_with_cables.php) in order to flash ur Dead N80, i did it, its a great instrument but quite expensive

Dx

NMayling

02-01-2007, 10:08 AM

well, maybe is not the best solution, but u can buy a J.A.F BOX in order to flash ur Dead N80, i did it, its a great instrument but quite expensive

Dx

Its a Solution , I'll take any option just now , but Might hold off and try track down someone local with one that I could borrow ( or just pay )

Considering I've messed up once anyone point me to somewhere that will do it for me ( I know there will be a charge )

NMayling

02-01-2007, 06:01 PM

Not sure how but just using pheonix I have a working phone again and its N80i

I kept trying , and it kept failing ( at different % complete ) , and was unable to scan the product , so just did open product

Last attempt gave this
Ape->Programming: 92%
Ape->INFO: Papub keys not programmed to phone
Ape->Programming of file 1 finished
Ape->Trying to verify communication 1 of 3
Ape->Communication verified to Adl Loader
Cmt->Ready for reboot
Ape->Ready for reboot
Ape->Rebooting phone
Ape->Phone rebooted, phone will be started in test mode
Cmt->Trying to verify communication 1 of 30
Cmt->Trying to verify communication 2 of 30
Cmt->Trying to verify communication 3 of 30
..........
Cmt->Trying to verify communication 29 of 30
Cmt->Trying to verify communication 30 of 30
Cmt->Failed to verify communication.
Flashing failed.
Flashing failed.

But for the first time the phone was showing signs of life - battery out and in again and we are good - thanks to all

chayertz

02-01-2007, 08:51 PM

Thanks for this post;
I've successfuly transform my N80 into N80i and now enjoy the Voip call with my freebox SIP account in France , that's great !!
I still have trouble to log into WPA/WPA2 network with PEAP but ....

forzatio

02-01-2007, 11:37 PM

Hey when I run the pheonix crack I get this error after it shows me a box that a doungle could not be found, nmp_component_mgr.dll NOT FOUND try reinstalling pheonix.

Where would this file be.

diea

03-01-2007, 07:21 AM

Hi All..

I just want to know what apac is having the Arabic language? I really don't use it but I need it for incoming messages :con?

please advise me before I flash my phone.

Thanks in advance.

My phone info:
N80 V3.061.0.6 03-05-2006
RM-92 (08)
Product Code: 0537357

diea

03-01-2007, 10:06 AM

Hay I Did it Thanks all ;)

The files I used:

0542489 GULF Pearl Black Internet Edition (Arabic-English-Francais-Deutsch-Espanol)
The File is: N80_rofx_4.0632.0.38-prd.V08

but I want to ask about 3 things :
1- The life timer didn't reset!!!
2- During the SW update I got this message (Ape->INFO: Papub keys not programmed to phone) What is that?
3- I didn't use the NSS can I change the product code using phonix? (Without effecting my Language Pack:) )

Thanks Again :cool:

dez_borders

03-01-2007, 11:50 AM

forzatio

03-01-2007, 12:26 PM

I tried to install phoenix on three differents pc's now but when I run the crack I get this error time after time:

mp_component_mgr.dll NOT FOUND try reinstalling pheonix.

pat_vrs

04-01-2007, 09:41 PM

i upgraded my n80 to n80ie .. work great ! :)
but i wonder if i can upgrade APAC to EMEA.. ? without any problems ?!?!
(because i'm looking for french language)

and... is there a big difference between :
0538301 EURO 1 Patina Bronze Internet Edition
0539363 EURO 1 Pearl Black Internet Edition
0539548 EURO 2 Patina Bronze Internet Edition
0539712 EURO 2 Pearl Black Internet Edition
0539473 EURO 3 Patina Bronze Internet Edition
0544109 EURO 3 Pearl Black Internet Edition
0539646 FRANCE Patina Bronze Internet Edition
0540867 FRANCE Pearl Black Internet Edition

i suppose all this firmwares will have english & french language ?!

thanks

dchky

05-01-2007, 01:19 AM

Yes you can, I did it by accident, then flashed back to APAC

i upgraded my n80 to n80ie .. work great ! :)
but i wonder if i can upgrade APAC to EMEA.. ? without any problems ?!?!
(because i'm looking for french language)

pat_vrs

05-01-2007, 01:26 AM

Yes you can, I did it by accident, then flashed back to APAC

thanks :)

i did it .. work great !
n80 -> n80ie APAC -> n80ie EMEA

now i got french language.. dictionnary.. etc.. cool !

0538301 Euro 1 ... languages:
English, Francais, Deutsch, Italiano, Portugues, Espanol

siapi

05-01-2007, 06:17 AM

Can anyone reupload Pheonix? The link in the post is dead. Thank you. :)
Another question, if i want to flash APAC Firmware. Do I only need to run RM-92_IE_APAC_PR_dp_v15.00_SW4.0632.0.38.exe?

acoolwelshbloke

05-01-2007, 05:24 PM

Well tha went ok, I now have:

V 4.0632.0.38
13-10-2006
RM-92
Nokia N80 (536.01)

However I see people recommend people to use Product Code: 0543922

That Product Code is the UK Country Variant for Patina Bronze. (That is what stated in pheonix when I select 0543922)

One thing I have noticed is that if you go to Menu> Tools> Settings> Network you can no longer switch between automatic and manual?

However I can switch between GSM and UTMS

siapi

05-01-2007, 06:45 PM

I just got phoenix_service_sw_patch_2006_34_3_157.exe
Should I apply this patch?

bray199

06-01-2007, 04:14 AM

Hi,

Looking to update my fone but the link is broken on this site, been unable to find the software elsewhere, can anyone relink.

phoenix_service_sw_2006_34_2_156.exe -- Where can i download this?

Cheers

Mark

tony040704

06-01-2007, 10:10 AM

Hi please help me out, this is what I have done so far:

Instructions

First change product code with NSS to allow flashing to N80i

1, install NSS and run
2, plug in phone and select "pc suite" on phone
3, in NSS click "scan for new devices"
4, Click phone info
5, click enable product code and enter 0543922 (this is for Euro with English but other codes are below, if you want apac then remeber to use the apac firmware)
6, Click "write"
7, when complete unplug phone and exit NSS

UNINSTALL ALL RELATED NOKIA PROGRAMS AND DRIVERS, THIS INCLUDES NSS, PC SUITE, CABLE DRIVERS AND ANY PREVIOUS INTALLATIONS OF DIEGO, PHEONIX ETC.

Now run the 2 firmware files, 15.00 first and then 15.01 ( this is for euro)

Now to install pheonix

1, Run reaper, all instructions are included within reaoer, you dont have to download anything because all files are included here.

2, Follow instructions "how to install pheonix" (skip the download files part)

3, install Diego

4, open pheonix dongle crack (double click on it but dont install yet)

5, install pheonix untill it prompte for dongle not found.

6, click "retry" and run crack immediately and press "yes to all" in new window that opens, if done correctly then pheonix will continue to install normally, if you didnt do this correctly then close current pheonix installation and re-start pheonix installation from step 4 above - YOU HAVE TO DO THIS STEP VERY VERY QUICKLY OR PHEONIX WILL NOT INSTALL AND YOU WILL HAVE TO TRY AGAIN.

7, It may stop installing pheonix with "DESkey not found" click on yes twice then it will continue to register dll files (in some cases you will not get this message untill after you restart your computer if prompted after installation)

8, restart your computer.

9, copy pheonix crack and framework.dll into pheonix folder (this is the folder that you installed pheonic into . probably C:\Program Files\Nokia\Phoenix (but this may be different on your PC)

I have followed these steps but now when I open phoenix nothing happens, a box comes up saying phoenix and thats it for 3 hours now. Am i doing something wrong? Please help

siapi

06-01-2007, 03:37 PM

I am facing the same problem as tony040704. phoenix froze after I ran it.

BTW, tony040704, when you were running NSS, did you have PC Suite installed in your PC at that time?

dez_borders

06-01-2007, 06:11 PM

I just got phoenix_service_sw_patch_2006_34_3_157.exe
Should I apply this patch?

You are welcome to try, but it broke my Phoenix 156 installation and I had to uninstall everything Nokia relared and start again from scratch.

Phoenix 2006 v156 works fine so up to you. Let us know if 157 works for you.

tony040704

06-01-2007, 11:39 PM

I am facing the same problem as tony040704. phoenix froze after I ran it.

BTW, tony040704, when you were running NSS, did you have PC Suite installed in your PC at that time?

Yea I had PC Suite when I ran NSS. What operating system are you running? im running windows mce does that make this whole thing incompatible? Someone please help I cannot get phoenix to work, Iv followed all the steps and after I install the crack and open phoenix it just sits there doing nothing

siapi

07-01-2007, 02:26 AM

I just flash my N80 to N80ie successfully.

I went directly to flash my phone without using NSS to change product code.

To tony, I had another computer, and I reinstall WinXP pro and all lastest windows update. Then I install phoenix and use it.

tony040704

07-01-2007, 09:14 AM

dez_borders

07-01-2007, 10:37 AM

Yea I had PC Suite when I ran NSS. What operating system are you running? im running windows mce does that make this whole thing incompatible? Someone please help I cannot get phoenix to work, Iv followed all the steps and after I install the crack and open phoenix it just sits there doing nothing

I have never nabaged to get Phoenix 2004,2005 or 2006 to work with XP Media Center Edition. Early versions of NSU also did not work on that O/S for me (I have not tried letest version of NSU).

Fortunately I have a laptop with XP Home and both Phoenix and NSU work fine on that.

acoolwelshbloke

07-01-2007, 11:21 AM

So it dosnt work on MCE you need windows xp pro?

Total bollox, Pheonix works just fine with MCE! ;)

MCE is XP with an extra program installed with it! :icon2:

I flashed my N80 to N80IE using Pheonix and MCE and it worked first time! :icon14:

I also did not change my product code before flashing, Pheonix did that at the end, that way if it went wrong Nokia would not have known I had tried to flash it to a non authorised firmware and therefore voiding my warranty! ;)

I will add one last thing, do not flash it with the UK CV, I had to re-flash it to the Euro 1 PB Internet Edition as the UK CV had two missing functions, one being press the # key to go straight to silent mode, and the second and major missing function is that they removed the ability to change from manual/automatic network selection! :o

dez_borders

07-01-2007, 05:29 PM

Total bollox, Pheonix works just fine with MCE! ;)

MCE is XP with an extra program installed with it! :icon2:

I flashed my N80 to N80IE using Pheonix and MCE and it worked first time! :icon14:

I also did not change my product code before flashing, Pheonix did that at the end, that way if it went wrong Nokia would not have known I had tried to flash it to a non authorised firmware and therefore voiding my warranty! ;)

I will add one last thing, do not flash it with the UK CV, I had to re-flash it to the Euro 1 PB Internet Edition as the UK CV had two missing functions, one being press the # key to go straight to silent mode, and the second and major missing function is that they removed the ability to change from manual/automatic network selection! :o

OK, I stand corrected, Phoenix and NSU can work on XP MCE edition, it just plain does not work on my Dell Dual Core PC and another forum poster's PC.

:cool:

acoolwelshbloke

07-01-2007, 05:40 PM

OK, I stand corrected, Phoenix and NSU can work on XP MCE edition, it just plain does not work on my Dell Dual Core PC and another forum poster's PC.

:cool:

That explains it then your using a Dell! What do you expect? :tongue:

tony040704

08-01-2007, 04:48 AM

To the guy who got phoenic working and has MCE, how did you do it?

rchandusingh

08-01-2007, 12:26 PM

Hi
I am not able to download the phoenix from the rapid share, the server responds saying that file not foud or file was deleted
can some one post new link.

Chandu

Cash

08-01-2007, 02:41 PM

Hi
I am not able to download the phoenix from the rapid share, the server responds saying that file not foud or file was deleted
can some one post new link.

Chandu

I just put up a new link to pheonix :)

acoolwelshbloke

08-01-2007, 04:05 PM

To the guy who got phoenic working and has MCE, how did you do it?

I just followed the instructions! Worked just fine! :icon14:

rchandusingh

08-01-2007, 07:58 PM

dez_borders

08-01-2007, 08:02 PM

I just followed the instructions! Worked just fine! :icon14:

So did we, but it plain don't work on my Dell Dual Core XP MCE.

I have installed and upgraded Phoenix about 4 times since April 2006 on my Laptop and always works. Never works after installing on the Dell.

Perhaps its the Dual Core CPU Phoenix don't like?

anabolic

08-01-2007, 08:07 PM

Hi
I have downloaded all the files listed and uninstalled every thing and i don't have any nokia softwares on my machine, when i installed nss, after installation do i need to install any drivers, please let me know, i ignored and started to proceed.
but i got the errors.
please see the screen here attached.

can you tell me how can i write the code to device.

Chandu

You might need to install the Nokia CA-53 USB cable driver. This is installed with Nokia PC Suite, but maybe you removed it. You can download it from Nokia websites. NSS won't work without this driver installed, I think.

(and don't forget to click the 'scan' button on the phone info page of NSS - but you probably tried that, I guess?)

rchandusingh

08-01-2007, 08:33 PM

how to install Reaper there is no next button on the screen.

Cash

08-01-2007, 08:41 PM

Hi
I have downloaded all the files listed and uninstalled every thing and i don't have any nokia softwares on my machine, when i installed nss, after installation do i need to install any drivers, please let me know, i ignored and started to proceed.
but i got the errors.
please see the screen here attached.

can you tell me how can i write the code to device.

Chandu

NSS is not technically needed, it just makes it a little easier to change the product code before using pheonix, pheonix will pick up the new product code you choose automatically, otherwise you have to pick which product code you want manually in pheonix.

Its correct what the anabolic says, you need the cable drivers to use NSS which are with nokia pcsuite,

rchandusingh

08-01-2007, 08:56 PM

Hi
I installed the Phoniex sucessfully, when i restarted it registed the dll's but at the end i got the error saying that problem in registering these entries.
"Registration problems:
-----------------------------------------------------------------------
- Registering context.dll failed:
Error msg: LoadLibrary(C:\Program Files\Nokia\Phoenix\Framework\context.dll) failed.
GetLastError returns 0x0000045a.
- Registering scriptcontext.dll failed:
Error msg: LoadLibrary(C:\Program Files\Nokia\Phoenix\Framework\scriptcontext.dll) failed.
GetLastError returns 0x0000045a."

While installing Phoniex i got 1 windows popup, which says that " one of the driver is not windows signed" i clicked continue anyway.
i installed on Windows XP SP 2 , on Intel Centrino duo with 1gb ram.
Would it be a problem when updating the frimware, i proceed pheonix crack and given myinfo it works, but would it create any problems in going forward.

Chandu

tony040704

09-01-2007, 05:21 AM

Cash

09-01-2007, 09:13 AM

Everytime i go to either install or uninstall diego 3.07 halfway through the installation i get this message:

Error 1713. Diego cannot install one of its required products. Contact your technical support group.

I download Diego 3.08 and Diego 3.09 and I still get the same message. And ive tried messing around with the crack installing it everywhere like before and after and inbetween but still no luck just this stupid error messgae. Someone please help

I have heard of people having problems installing both diego and pheonix, this may be a conflict with an existing program on the PC becuase some of these people reformatted their pc and installed a fresh windows and then they are able to install, its drastic, but seems to work, also somebody here installed a virtual o/s on their pc .. look back in this thread or do a search to find out what they did..

rchandusingh

09-01-2007, 09:36 AM

Hi
Is there any problem if i would continue to flash my n80 to N80 IE, if these components were not registered in phoniex.
"
Registration problems:
-----------------------------------------------------------------------
- Registering context.dll failed:
Error msg: LoadLibrary(C:\Program Files\Nokia\Phoenix\Framework\context.dll) failed.
GetLastError returns 0x0000045a.
- Registering scriptcontext.dll failed:
Error msg: LoadLibrary(C:\Program Files\Nokia\Phoenix\Framework\scriptcontext.dll) failed.
GetLastError returns 0x0000045a.
-----------------------------------------------------------------------
"

Chandu

Originlabs

09-01-2007, 04:39 PM

Another success story. Worked great here, thanks for the instructions. Btw, I used Vista Ultimate Edition without any problems.

rchandusingh

09-01-2007, 06:02 PM

rchandusingh

09-01-2007, 07:00 PM

Can some body help me please
Chandu

Originlabs

10-01-2007, 02:05 PM

Hi

I have Cleaned every thing in another system and tried the listed steps, still i get the same errors.
I am attaching the errror page that i got while installing phoenix and the error message is same as in the previous posts, 2 dll's are not getting registered.
Can you please suggest how can i rectify this and proceed.

The system i installed this time was win XP Professional, with 1.5gb ram and it is IBM T42 ThinkPad.

From the image you provided, i looks as though you just need to click on "Continue Anyway". The message is not an error, just a warning that the drivers you are about to install have not been vetted by Microsoft.

rchandusingh

10-01-2007, 02:26 PM

Yes, I am just afrid that these files are listed under the minimal section inthe installation log files found C:\Program Files\Nokia\Phoenix\*.log.

if i continue installing will it suceed, but i am able to open the phoenix and tried to create a connection it detects my phone, if i proceed with FW update will it suceed.

Chandu

tony040704

11-01-2007, 06:23 AM

poulpe

11-01-2007, 10:52 AM

Hello.
Update successfull for me !!!

But....:frown: , wlan with WPA/TKIP doesn't work. Is there a solution (with WPA and no WEP) to have WLAN (and SIP ;) ) with my "new n80i" !!

Thanks by advance

Poulpe

Cash

11-01-2007, 02:32 PM

I finally flashed my phone I had use a computer with xp pro phoenix dosnt work with xp mce... anyways i wanted to know as I was watching the output in phoenix, this came up :

Ape->INFO: Papub keys not programmed to phone

what is that? what does it mean

Havnt got a clue what it is, but I had the same thing and so have many others ... so I wouldn't worry too much about it ...phone works fine :)

rchandusingh

11-01-2007, 05:39 PM

Hi

I have cleaned my system and removed all the registry values where i found nokia, with the help of winxp manager still i get the same error, is it safe to proceed with the flashing. and checked the c:\program files\nokia\ and c:\program files\common files\nokia and removed the nokia specific folders from the system, please help me out.

if any one have faced the same problem while installing, i use win XP home edition,

Chandu
Finland.

dchky

12-01-2007, 08:26 AM

People likely do want to help you rchandusingh, though your terminology is a little bit confusing. Regedit is the program you need to use to clean out your registry, there are other applications that are supposed to do this automatically though personally I've found they don't all work so well, some not at all. No idea what winxp manager is, though just deleting the nokia stuff from your filesystem is not going to work.

Once you've fired up regedit and cleaned things, you can then install phoenix and flash your phone. Phoenix does pop up a couple of strange messages that look like errors, though just keep hitting the next button and it'll all work out fine in the end. It did for me at least, and I have a serious amount of crud installed on this machine. Lots of Sony Ericsson junk as well.

Once I had phoenix up and running, I re-installed nokia PC suite - both run happily, though not so well at the same time.

Hi

I have cleaned my system and removed all the registry values where i found nokia, with the help of winxp manager still i get the same error, is it safe to proceed with the flashing. and checked the c:\program files\nokia\ and c:\program files\common files\nokia and removed the nokia specific folders from the system, please help me out.

if any one have faced the same problem while installing, i use win XP home edition,

Chandu
Finland.

rchandusingh

12-01-2007, 09:32 AM

Hi Sorry for all the confusions.

Let me explain what i have done, when i got the errors device drivers signing error, i have installed it clicking "continue anyway", after that it failed with registring the "context.dll & scriptcontext.dll".

I unintalled everything and restarted my machine (nokia, phoenix, Degio, TSS API, FLS Drvies, Nokia Connectivity Cable,DKu-5 cable Drivers) and deleted the left out stuff of the nokia folders from "c:\program files\common files\nokia & c:\program files\nokia" and ran the winxp manager for cleaning registry for invalid dll references and invalid program files it showed up some registry entires for the Phoenix & TSS API's i gone through each and every one inthe registry and proceed with winxp to remove them. Once again i restarted my machine and searched for all the nokia, phoenix, Degio, TSS API, FLS Drvies, RM-92 EMEA data package, in the registry and folders to make sure my machine is clean from every thing. i have stopped the Secirity Clients that i have on my machin (zone alarm ) defore doing this all so that i doesn't restrict some thing to get installed.

but still after doing all these i am not able to succed, afte getting this error i am able to open the phoenix and registed with a username and i can detect my phone and all, but if i proceed with flashing will it suceed thats what i am afrid of.

Thanks for helping me.
waiting for some one to diagonise and get back to me.

Chandu

knuckleskin

12-01-2007, 05:31 PM

Can anyone confirm for me, I cant seem to connect to rapidshare.com at the moment to download NSS or Pheonix. Is it just me?

kalel795

12-01-2007, 11:11 PM

can anyone send me this file i can get all the others but this one just wont come down

Diego, cracks, reaper

thanks

rchandusingh

13-01-2007, 09:22 AM

Hi
Once again

i tried this time and got the same error, but i tried to proceed further, when the phone is dectecting in the phoenix, i have the following log in the lower end window, and found that

Starting... Please Wait.
Detecting previous options
Options detected
Creating other components...
Checking provider components
Provider components checked
Detecting flash device, please wait
Initializing
Initializing
Detecting FLS device.
FLS device not detected.
Flash device detection ended
ADL USB Flashing Selected
Reading data from phone
Reading phone information
Reading product type
Reading product code
Reading PSN
Get flash file names
Reading IMEI
Reading HW version
Reading flash settings from file(s)
Polling product
Procedure completed

Can any one tell if they any of you had the same of it dectected the FLS device also.

Regards
Chandu

wgoettsch

14-01-2007, 08:51 PM

Also success for me. Great work.

Wim

messus

14-01-2007, 09:25 PM

rchandusingh

15-01-2007, 08:14 AM

Hi, I know what you are talking about, since I got the exact same error messages, failing to register those two DLL's.

I went ahead and flashed anyway, and it worked just fine !!! :)

I checked for the two DLL files and they were installed in the Phoenix catalogs..

Good luck!!! :)

Can you let me know where can i find weather those ddl's where acutally registered or not, how to check them as you said that you checked for the 2 dll's that were installed in phoenix catallogs, and plese let me know to which code you have flashed i will proceed, i am using Windods XP home edition.
Thanks in advance.

llol_slim

15-01-2007, 06:05 PM

hi i would like to upgrade to N80i but can anyone tell me, does tom tom 6 still work?
I have a legal version and use it regularly. can anyone confirm this works?
thanks

fuzion2k

16-01-2007, 09:18 AM

Hi,

This guide is great, I upgraded my to APAC Australia firmware and now I got N80ie :)..but I got a little dilemma, the chinese language is no longer available on the phone, how can I upgrade to the Hong Kong APAC ver?

daverave

16-01-2007, 03:42 PM

Cash

16-01-2007, 04:23 PM

For anyone waiting for the official NSU upgrade to be made available you may have a long wait. The official line from Nokia UK is as follows :-

Thank you for contacting the Club Nokia Careline.

With regard to your email concerning the Nokia N80, we can advise that
its is not possible to upgrade the N80 to become an N80ie as the
handset are similar but fundamentally different handset altogether.

Please don't hesitate to contact us again if you have any further
questions.

With best regards
UK & Ireland Team
Nokia Helpline
I replied as follows :-

In response to your reply stating that the N80 and N80ie are fundamentally different I would refer you to your US web site which states :-

Q: What is the difference between the Nokia N80 and the Nokia N80 Internet Edition?

A:
Nokia N80 Internet Edition

The differences between the Nokia N80 and Nokia N80 Internet Edition are added features for Internet capabilities as well as VoIP (Voice over Internet Protocol). There are no hardware differences between the two Nokia devices.

I would also point out that they also state

Q: How do I update my Nokia N80 to the Internet Edition?

A:
Nokia N80 Internet Edition

You can update your Nokia N80 to the Internet Edition by using the Nokia Software Updater.

This would seem to be the complete opposite to your reply. Can you explain or is it just that Nokia UK does not want to allow users to upgrade to N80ie for free as I suspect.

I will post their reply if and when I get it but in the mean time dont hold your breath for an official NSU upgrade!!!!!

Perhaps all who read this should contact Nokia and point out the error of their ways!

Hmmm...more Bull from those friendly guys at Nokia.....I wonder if there is any legal requirements for them to answer a direct question like this with the truth,

We all know that the N80ie firmware works with the N80, and that there is no-one that I know who has said that the IE firmware damages or impedes the way in which the N80 works after flashing, in fact the exact opposite....Its funny that one official Nokia source completely 100% contradicts another official nokia source, although I cant say I am completely surprised

Dont forget though, you had a reply from the helpline, and these guys dont really know what they are talking about, just whats written down on a standard reply form, you need to direct questions a little further up the ladder.